Debian Soft Raid

From YobiWiki
Jump to navigation Jump to search

How to switch a Debian system on software RAID 1 (mirroring)


Here are just some quick notes to update this page as now everything can be done relatively easily with just mdadm.
A very interesting page:
It helps getting familiar with the concepts.
Here it's not a step-by-step anymore as the first time I used the old method described later and I used the new mdadm-only way to replace a broken drive, build new raid1 arrays as the new drive was larger (and the old smaller than the surviving one) and a raid1 on the /boot and moving from lilo to grub.

Creating degraded array

Here we're missing /dev/hda3 so we start with only /dev/hdd3:

mdadm --create /dev/md0 --raid-devices=2 --level=raid1 missing /dev/hdd3

And to get it properly set after reboot, we can create mdadm.conf:

echo DEVICE partitions > /etc/mdadm/mdadm.conf
mdadm --examine --scan >> /etc/mdadm/mdadm.conf

Edit and check the file manually...
Then prepare for reboot

Preparing for reboot

During the configuration, every time we want to reboot, we've to make sure to:

  • have the intended partition layout (fdisk)
  • have the intended partitions mounted on the intended mountpoints (mount)
  • have /etc/fstab reflecting the current mounts
  • have /etc/mdadm/mdadm.conf reflecting the current Raid arrays
  • have an initrd reflecting the current situation:
dpkg-reconfigure linux-image-...

This is true also after having added the 2nd partition to a raid1 array


Some useful commands to inspect the raid situation:

# From what's currently assembled:
cat /proc/mdstat
mdadm --detail --scan
mdadm --detail /dev/md1
# From what's available as raid partitions
mdadm --examine --scan
mdadm --examine /dev/hda5

Repairing a degraded array

Later when we'll be able to integrate /dev/hda3 we'll do:

mdadm /dev/md0 --add /dev/hda3

Then prepare for reboot


Here is one example:
Initially /boot was not on raid1 but as now it's possible with grub I did so.
I had /boot=/dev/hda1 and /boot-img=/dev/hdd1 and I did sth like:

umount /dev/hdd1
mdadm --create /dev/md1 --raid-devices=2 --level=raid1 missing /dev/hdd1
mount /dev/md1 /boot-img
cp -a /boot/* /boot-img
umount /boot
umount /boot-img
mdadm /dev/md1 --add /dev/hda1
vi /etc/fstab #/dev/md0 /boot ... and delete /boot-img entry
grub-install "(hd1)"
grub-install "(hd0)"
dpkg-reconfigure linux-image-...
mdadm --examine --scan |grep md1>> /etc/mdadm.conf

Changing super-minor

During the process I wanted to change the number associated to an array (/dev/mdX):
Suppose /dev/md3 = /dev/hda5+/dev/hdd5
And we want /dev/md2 = /dev/hda5+/dev/hdd5

mdadm --stop /dev/md3
mdadm --assemble /dev/md2 /dev/hda5 /dev/hdd5

Then prepare for reboot


To rebuild the initrd there are several tools but finally I used yaird which allowed me to preload my IDE driver and get UDMA modes working, which was essential to get sth like 20x faster data transfers!
I inserted just before the MOUNTDIR keyword which takes care of inserting the needed generic IDE drivers the amd74xx driver I needed for my nVidia chipset:

MODULE          amd74xx
MOUNTDIR        "/" "/mnt"

I had also some difficulties when I broke my initrd and had to reboot on a 2.6.14 because apparently kernels pre-2.6.18 cannot generate properly initrd images.
Hopefully I had a backup of the initrd otherwise try to reboot on a liveCD and chroot or build a new kernel from source without initrd then boot on that one to prepare the initrd.

You can always inspect the initrd by yourself to check things like modules, raid assembly etc, the file is a cpio archive gzip compressed.


I moved from lilo to grub and installed the first stage on both drives:

grub-install "(hd1)"
grub-install "(hd0)"

I edited /etc/kernel-img.conf to have the hooks for Debian kernel automatic installation:

postinst_hook = /usr/sbin/update-grub
postrm_hook = /usr/sbin/update-grub
do_bootloader = no

I edited /boot/grub/menu.lst and added a fallback directive:

default         0
fallback        1

When executing update-grub it creates the following entry:

title           Debian GNU/Linux, kernel 2.6.21-2-vserver-k7
root            (hd0,0)
kernel          /vmlinuz-2.6.21-2-vserver-k7 root=/dev/md0 ro 
initrd          /initrd.img-2.6.21-2-vserver-k7

And I added manually the following one:

title           Debian GNU/Linux, kernel 2.6.21-2-vserver-k7 (hd1)
root            (hd1,0)
kernel          /vmlinuz-2.6.21-2-vserver-k7 root=/dev/md0 ro 
initrd          /initrd.img-2.6.21-2-vserver-k7

But I don't know how to make it happening automatically via update-grub, anyway in case of a failure of the first harddrive I'll probably have to reboot manually and Grub is rich enough to allow reconfiguration on-the-fly.
That's the major reason why I moved away from lilo.

How to switch a Debian system on software RAID 1 (mirroring) (OLD)

Here is how to switch your root (/) filesystem on RAID 1:

Have 2 same disks, let's say hda and hdc (yep, put them on different IDE controllers!)
Create a specific small partition for /boot at the very beginning of the first disk (hda) because some (most?) bootloaders don't understand RAID.
Mine is hda1->/boot hda2->swap hda3->/
Install Debian as usual on hda
Format hdc with a same partition as the / on hda, it'll be the RAID mirror of /
My second disk (same vendor, same size) didn't have the same geometry (C/H/S) but after dd if=/dev/zero of=/dev/hdc bs=512 count=1 fdisk used the same geometry...
Now it is the same as hda: hdc1->/boot-img hdc2->swap hdc3->/

apt-get install initrd-tools raidtools2 mdadm (decline offer to start RAID at boot time)

Create /etc/raidtab:

raiddev                 /dev/md0
raid-level              1
nr-raid-disks           2
nr-spare-disks          0
persistent-superblock   1
device                  /dev/hdc3
raid-disk               0
device                  /dev/hda3
failed-disk             1

So the actual / partition is declared as "broken" for the RAID
Create the RAID:

mkraid /dev/md0 (it will say disk1: failed)
mkfs.ext3 /dev/md0
mount -v /dev/md0 /mnt/root

Copy the / content:

cd /
find . -xdev | cpio -pm /mnt/root

Prepare to reboot on the RAID:
Edit /etc/mkinitrd/mkinitrd.conf:

ROOT=probe -> ROOT=/dev/md0
mkinitrd -o /boot/initrd.img-raid

Edit /mnt/root/etc/fstab:

/dev/md0 / ext3 defaults,errors=remount-ro 0 1

Edit /etc/lilo.conf:

umount /dev/md0
raidstop /dev/md0

Restore the "broken" RAID:

cat /proc/mdstat: we see only one disk
raidhotadd /dev/md0 /dev/hda3

Now the system is synchonizing the "new" RAID partition

watch cat /proc/mdstat

Prepare for next reboot:
Edit /etc/fstab:

failed-disk -> raid-disk
mkinitrd -o /boot/initrd.img-raid

Automatic watching

dpkg-reconfigure mdadm -> accept mdadm survey daemon and give user who should get alert emails

Simulating RAID 0 (striping) for the swap:
Simply give the same priority to both swap partitions:

/dev/hda2 swap swap defaults,pri=1 0 0
/dev/hdc2 swap swap defaults,pri=1 0 0

Fresh install debian

| A good starting point


Don't simply dd the MBR from hda to hdc otherwise lilo will complain about a timestamp error, actually that's because now both disks got the same ID number.
You can mount the initrd image to check if it contains well the RAID instructions:

mount /boot/initrd.img-raid /mnt/disk -o loop,ro

/mnt/disk/script should contain a last line with mdadm
check the end of the line, first time only /dev/hdc3 is mentioned, second time /dev/hda3 should also be present (or the system will be mounted again in degraded mode)
If reboot fails: Boot on a Knoppix

modprobe raid1
mdadm --assemble /dev/md0 /dev/hdd3 /dev/hda3
mount /dev/md0 /mnt/xxx
chroot /mnt/xxx
mount also /proc /boot etc
mkinitrd -o /boot/initrd.img-raid <kernel version>

See also LaCie_5big_Network_2#Two_faulty_disks_on_a_5-disk_RAID5

Useful commands

  • Diagnostics
mdadm -D /dev/mdXX
mdadm -E /dev/hdXX
cat /proc/mdstat
  • Add
mdadm /dev/mdXX -a /dev/hdXX