Revision as of 01:02, 6 March 2015

my personal notes about USB armory

Hardware

Set manual ip to usb0: 10.0.0.2, no routing, no DNS, via NotworkManager or:

/sbin/ip link set usb0 up
/sbin/ip addr add 10.0.0.2/24 dev usb0

Give connectivity to USB armory

/sbin/iptables -t nat -A POSTROUTING -s 10.0.0.1/32 -o wlan0 -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward

Connect

ssh usbarmory@10.0.0.1 # pwd usbarmory

Quick setup time (in case ntpdate couldn't catch up at boot)

ssh usbarmory sudo date --set $(date +@%s)

Free the LED

ssh usbarmory@10.0.0.1 sudo sed -i '/^ledtrig_heartbeat/d' /etc/modules

Quick backup of the most important things (~9Mb)

ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - /etc /root /home /var' |gzip > backup-$(date "+%Y%m%d-%H%M%S").tgz

Explore image

mkdir mnt
sudo mount -o loop,offset=0x500000,ro usbarmory-debian_wheezy-base_image-20150302.raw mnt

@@ Line 29: / Line 29: @@
 Or via [https://code.google.com/p/shellinabox/ ShellInABox]: https://10.0.0.1:4200/
-Setup time (required at each boot if you don't use a daemon)
+Quick setup time (in case ntpdate couldn't catch up at boot)
  ssh usbarmory sudo date --set $(date +@%s)
 Free the LED
+ ssh usbarmory@10.0.0.1 sudo sed -i '/^ledtrig_heartbeat/d' /etc/modules
- ledtrig_heartbeat module in
-/etc/modules.
+Quick backup of the most important things (~9Mb)
-Initial backup
- ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - --one-file-system / /dev' |pv|gzip > image.tgz
+ ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - /etc /root /home /var' |gzip > backup-$(date "+%Y%m%d-%H%M%S").tgz
 Explore image