Difference between revisions of "USB armory"
Jump to navigation
Jump to search
m (→Quick setup) |
m (→Quick setup) |
||
| Line 38: | Line 38: | ||
Initial backup |
Initial backup |
||
ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - --one-file-system / /dev' |pv|gzip > image.tgz |
ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - --one-file-system / /dev' |pv|gzip > image.tgz |
||
| + | |||
| + | Explore image |
||
| + | mkdir mnt |
||
| + | sudo mount -o loop,offset=0x500000,ro usbarmory-debian_wheezy-base_image-20150302.raw mnt |
||
Revision as of 00:43, 6 March 2015
my personal notes about USB armory
Hardware
- Freescale i.MX53 ARM® Cortex™-A8 800MHz
- 512MB DDR3 RAM
Links
Quick setup
Set manual ip to usb0: 10.0.0.2, no routing, no DNS, via NotworkManager or:
/sbin/ip link set usb0 up /sbin/ip addr add 10.0.0.2/24 dev usb0
Give connectivity to USB armory
/sbin/iptables -t nat -A POSTROUTING -s 10.0.0.1/32 -o wlan0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward
Connect
ssh usbarmory@10.0.0.1 # pwd usbarmory
Or via ShellInABox: https://10.0.0.1:4200/
Setup time (required at each boot if you don't use a daemon)
ssh usbarmory sudo date --set $(date +@%s)
Free the LED
ledtrig_heartbeat module in
/etc/modules.
Initial backup
ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - --one-file-system / /dev' |pv|gzip > image.tgz
Explore image
mkdir mnt sudo mount -o loop,offset=0x500000,ro usbarmory-debian_wheezy-base_image-20150302.raw mnt