Syslog

From YobiWiki
Jump to navigation Jump to search

Syslog-ng

Install

apt-get install syslog-ng

Example of /etc/syslog-ng/syslog-ng.conf:

Comment kernel source out as we are in a vserver:

   source s_all {
       #file("/proc/kmsg" log_prefix("kernel: "));

I want to keep the original hostnames:

   options {
       keep_hostname(1);

Enable logging per remote host

source net { udp(ip(<local_ip_or_hostname>)); };

Add specific destination files to collect auth.log and syslog.log of every remote (and local) node:
Note that for some we add a template to replace the IP by the hostname in the msgs

destination df_zeus_auth      {   file("/var/log/remote/MAIN/auth.log"        owner("root") group("adm") perm(0640) template("$DATE MAIN $MESSAGE\n")); };
destination df_zeus_syslog    {   file("/var/log/remote/MAIN/syslog.log"      owner("root") group("adm") perm(0640) template("$DATE MAIN $MESSAGE\n")); };
destination df_zeus_kern      {   file("/var/log/remote/MAIN/kern.log"        owner("root") group("adm") perm(0640) template("$DATE MAIN $MESSAGE\n")); };
destination df_mx_auth        {   file("/var/log/remote/mx/auth.log"          owner("root") group("adm") perm(0640)); };
destination df_mx_syslog      {   file("/var/log/remote/mx/syslog.log"        owner("root") group("adm") perm(0640)); };
destination df_public_auth    {   file("/var/log/remote/public/auth.log"      owner("root") group("adm") perm(0640) template("$DATE public $MESSAGE\n")); };
destination df_public_syslog  {   file("/var/log/remote/public/syslog.log"    owner("root") group("adm") perm(0640) template("$DATE public $MESSAGE\n")); };
destination df_private_auth   {   file("/var/log/remote/private/auth.log"     owner("root") group("adm") perm(0640) template("$DATE private $MESSAGE\n")); };
destination df_private_syslog {   file("/var/log/remote/private/syslog.log"   owner("root") group("adm") perm(0640) template("$DATE private $MESSAGE\n")); };
destination df_ns0_auth       {   file("/var/log/remote/ns0/auth.log"         owner("root") group("adm") perm(0640) template("$DATE ns0 $MESSAGE\n")); };
destination df_ns0_syslog     {   file("/var/log/remote/ns0/syslog.log"       owner("root") group("adm") perm(0640) template("$DATE ns0 $MESSAGE\n")); };
destination df_sql_auth       {   file("/var/log/remote/sql/auth.log"         owner("root") group("adm") perm(0640) template("$DATE sql $MESSAGE\n")); };
destination df_sql_syslog     {   file("/var/log/remote/sql/syslog.log"       owner("root") group("adm") perm(0640) template("$DATE sql $MESSAGE\n")); };
destination df_devel_auth     {   file("/var/log/remote/devel/auth.log"       owner("root") group("adm") perm(0640) template("$DATE devel $MESSAGE\n")); };
destination df_devel_syslog   {   file("/var/log/remote/devel/syslog.log"     owner("root") group("adm") perm(0640) template("$DATE devel $MESSAGE\n")); };
destination df_others_auth    {   file("/var/log/remote/$HOST/auth.log"       owner("root") group("adm") perm(0640)); };
destination df_others_syslog  {   file("/var/log/remote/$HOST/syslog.log"     owner("root") group("adm") perm(0640)); };
destination df_nf_ethr_in     {   file("/var/log/remote/MAIN/NF/ethr_in.log"  owner("root") group("adm") perm(0640) template("$DATE MAIN $MESSAGE\n")); };
destination df_nf_ethr_out    {   file("/var/log/remote/MAIN/NF/ethr_out.log" owner("root") group("adm") perm(0640) template("$DATE MAIN $MESSAGE\n")); };
destination df_nf_others      {   file("/var/log/remote/MAIN/NF/others.log"   owner("root") group("adm") perm(0640) template("$DATE MAIN $MESSAGE\n")); };

Add filters for remote nodes:
This is quite strange but msgs from the host are seen as coming from the IP of the collecting node
As the source will be net instead of s_all, we can still distinguish both from each other
Filters are sub-string regexps so we have to pay attention that IP x.x.x.1 can catch IP x.x.x.100 if not ended with a $

filter f_zeus    { host(192.168.x.x$); };
filter f_public  { host(192.168.x.x$); };
filter f_private { host(192.168.x.x$); };
filter f_ns0     { host(192.168.x.x$); };
filter f_devel   { host(192.168.x.x$); };
filter f_sql     { host(192.168.x.x$); };

For the host which gets the kernel logs, we add filters for the netfilter logs:

filter f_nf       { match("NF Dropped "); };
filter f_ethr_in  { match("ETH_R IN "); };
filter f_ethr_out { match("ETH_R OUT "); };

Then combine all those in log statements
They all contain the flag final so each entry will be captured only once, this avoids us to write negated filters and this should accelerate a bit the processing

log {
        source(net);
        filter(f_zeus);
        filter(f_auth);
        destination(df_zeus_auth);
        flags(final);
};
log {
        source(net);
        filter(f_zeus);
        filter(f_kern);
        filter(f_nf);
        filter(f_ethr_in);
        destination(df_nf_ethr_in);
        flags(final);
};
log {
        source(net);
        filter(f_zeus);
        filter(f_kern);
        filter(f_nf);
        filter(f_ethr_out);
        destination(df_nf_ethr_out);
        flags(final);
};
log {
        source(net);
        filter(f_zeus);
        filter(f_kern);
        filter(f_nf);
        destination(df_nf_others);
        flags(final);
};
log {
        source(net);
        filter(f_zeus);
        filter(f_kern);
        destination(df_zeus_kern);
        flags(final);
};
log {
        source(net);
        filter(f_zeus);
        filter(f_syslog);
        destination(df_zeus_syslog);
        flags(final);
};
# Don't forget ourselves:
log {
        source(s_all);
        filter(f_auth);
        destination(df_mx_auth);
};
log {
        source(s_all);
        filter(f_syslog);
        destination(df_mx_syslog);
};
# Other vservers:
log {
        source(net);
        filter(f_public);
        filter(f_auth);
        destination(df_public_auth);
        flags(final);
};
log {
        source(net);
        filter(f_public);
        filter(f_syslog);
        destination(df_public_syslog);
        flags(final);
};
log {
        source(net);
        filter(f_private);
        filter(f_auth);
        destination(df_private_auth);
        flags(final);
};
log {
        source(net);
        filter(f_private);
        filter(f_syslog);
        destination(df_private_syslog);
        flags(final);
};
log {
        source(net);
        filter(f_ns0);
        filter(f_auth);
        destination(df_ns0_auth);
        flags(final);
};
log {
        source(net);
        filter(f_ns0);
        filter(f_syslog);
        destination(df_ns0_syslog);
        flags(final);
};
log {
        source(net);
        filter(f_sql);
        filter(f_auth);
        destination(df_sql_auth);
        flags(final);
};
log {
        source(net);
        filter(f_sql);
        filter(f_syslog);
        destination(df_sql_syslog);
        flags(final);
};
log {
        source(net);
        filter(f_devel);
        filter(f_auth);
        destination(df_devel_auth);
        flags(final);
};
log {
        source(net);
        filter(f_devel);
        filter(f_syslog);
        destination(df_devel_syslog);
        flags(final);
};
# Catch other remote hosts:
log {
        source(net);
        filter(f_auth);
        destination(df_others_auth);
        flags(final);
};
log {
        source(net);
        filter(f_syslog);
        destination(df_others_syslog);
        flags(final);
};

Allow inbound connections from monitoring subnet

iptables -A INPUT -s xxxx -d xxxx -p udp --dport 514 -m state --state NEW -j ACCEPT

On satellite hosts: add to /etc/syslog.conf

*.*               @192.168.x.xxx

Resources & Credits


Logrotate

We add a file to rotate our new log files:

/etc/logrotate.d/local-syslog-ng:
/var/log/remote/*/*.log {
  rotate 28
  missingok
  notifempty
  daily
  compress
}

The call to syslog-ng reload will be done by the native /etc/logrotate.d/syslog-ng so we don't need to do it ourselves

Logcheck

Install

apt-get install logcheck logcheck-database

In /etc/logcheck/logcheck.conf:

INTRO=0
REPORTLEVEL="paranoid"
ADDTAG="yes"

In /etc/logcheck/logcheck.logfiles

/var/log/remote/MAIN/auth.log                                                                                                                                             
/var/log/remote/MAIN/syslog.log                                                                                                                                           
/var/log/remote/MAIN/kern.log                                                                                                                                             
/var/log/remote/mx/auth.log                                                                                                                                               
/var/log/remote/mx/syslog.log                                                                                                                                             
/var/log/remote/public/auth.log                                                                                                                                           
/var/log/remote/public/syslog.log                                                                                                                                         
/var/log/remote/private/auth.log                                                                                                                                          
/var/log/remote/private/syslog.log                                                                                                                                        
/var/log/remote/ns0/auth.log                                                                                                                                              
/var/log/remote/ns0/syslog.log                                                                                                                                            
/var/log/remote/sql/auth.log                                                                                                                                              
/var/log/remote/sql/syslog.log                                                                                                                                            
/var/log/remote/devel/auth.log                                                                                                                                            
/var/log/remote/devel/syslog.log                                                                                                                                          
#/var/log/remote/MAIN/NF/ethr_in.log                                                                                                                                      
/var/log/remote/MAIN/NF/ethr_out.log                                                                                                                                      
/var/log/remote/MAIN/NF/others.log

Because logrotate runs as cron.daily, e.g. 03:25 every day, we want logcheck to have run once just before (e.g. at xx:24) so I edit /etc/cron.d/logcheck:

24 * * * *       logcheck    if [ -x /usr/sbin/logcheck ]; then nice -n10 /usr/sbin/logcheck; fi

Tuning logcheck filters

Solving the issue at the source

I have many such messages in the vserver:

pam_limits[863]: setrlimit limit #6 to soft=-1, hard=-1 failed: Operation not permitted; uid=0 euid=0

Not sure why, probably because vserver max limits are reduced.
To get rid of it, comment the line in /etc/pam.d/cron and /etc/pam.d/ssh:

#session    required     pam_limits.so

Writing and testing new rules

Add your rules into files prepend by "local-" to distinguish your own rules.
Be sure to tune ownership and rights of those new files so that user logcheck can read them.
e.g. rw-r----- root:logcheck

To test logcheck filtering rules:

sed -e 's/[[:space:]]*$//' <logfile> | egrep '<regexp>'

Then you can dry run logcheck on the command line:

su logcheck -s /bin/bash -c "/usr/sbin/logcheck -l <logfile> -o -t" 

This is easier if you have sudo installed...

Examples of home-made rules

As I run in paranoid mode, I take some rules from server mode:

  • /etc/logcheck/ignore.d.paranoid/local-sa-exim -> /etc/logcheck/ignore.d.server/sa-exim
  • /etc/logcheck/ignore.d.paranoid/local-fetchmail -> /etc/logcheck/ignore.d.server/fetchmail

For imapd sessions:

/etc/logcheck/ignore.d.paranoid/local-imap:
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ imapd: Connection, ip=\[[:.0-9a-f]+\]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ imapd: LOGIN, user=[a-z]+, ip=\[[:.0-9a-f]+\], protocol=IMAP$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ imapd: (TIMEOUT|LOGOUT), (user=[a-z]+, )?ip=\[[:.0-9a-f]+\], (headers=[0-9]+, body=[0-9]+, )?rcvd=[0-9]+, sent=[0-9]+(, time=[0-9]+, starttls=1)?$

For imapproxy sessions:
Probably because of the templates in syslog-ng we have to change a bit the rules of ignore.d.server/imapproxy

/etc/logcheck/ignore.d.paranoid/local-imapproxy:
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ in.imapproxyd\[[0-9]+\]: LOGOUT: \\?'\\?"[_[:alnum:]-]+(@[-_.[:alnum:]]+)?\\?"\\?' from server sd \[[0-9]+\]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ in.imapproxyd\[[0-9]+\]: LOGIN: \\?'\\?"[_[:alnum:]-]+(@[-_.[:alnum:]]+)?\\?"\\?'  \([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}:[0-9]+\) on (existing|new) sd \[[0-9]+\]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ in.imapproxyd\[[0-9]+\]: Expiring server sd \[[0-9]+\]$

For ssh just an excerpt from the ignore.d.server/ssh:

/etc/logcheck/ignore.d.paranoid/local-ssh:
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ sshd\[[0-9]+\]: Accepted (gssapi(-with-mic)?|rsa|dsa|password|publickey|keyboard-interactive/pam) for [^[:space:]]+ from [^[:space:]]+ port [0-9]+( (ssh|ssh2))?$

php-syslog-ng

cf http://www.phpwizardry.com/php-syslog-ng.php

Install

In Apache node

Get http://www.phpwizardry.com/php-syslog-ng/phpsyslogng-2.8.tar.gz
Untar it in /usr/local/share/phpsyslogng
Manage the config file the Debian way: move config/config.php to /etc/phpsyslogng/config.php and make a symlink
In config.php, change at least those lines and assign your passwords:

define('DBUSERPW', 'aaaa');
define('DBADMINPW', 'cccc');

And in our case as the sql is running on a separate node:

define('DBHOST', 'sql'); 

Create /etc/apache2/sites-available/phpsyslogng with:

Alias /syslog /usr/local/share/phpsyslogng
<Directory /usr/local/share/phpsyslogng>
 Options FollowSymLinks
</Directory>

Reload apache2 and go to http:// ... /syslog you will get a help page for the installation process.

In Mysql node

Take scripts/dbsetup.sql from php-syslog-ng
But adapt some lines to our situation:

# create users
INSERT INTO user (Host, User, Password) VALUES ('private','sysloguser', password('aaaa'));
INSERT INTO db (Host, Db, User) VALUES ('private','syslog','sysloguser');

INSERT INTO user (Host, User, Password) VALUES ('mail','syslogfeeder', password('bbbb'));
INSERT INTO db (Host, Db, User) VALUES ('mail','syslog','syslogfeeder');

INSERT INTO user (Host, User, Password) VALUES ('private','syslogadmin',password('cccc'));
INSERT INTO db (Host, Db, User) VALUES ('private','syslog','syslogadmin');
COMMIT;
FLUSH PRIVILEGES;

# grant rights to user syslogadmin for backup purpose
GRANT USAGE ON syslog.* TO syslogadmin@private;
GRANT ALL ON syslog.* TO syslogadmin@private;
GRANT RELOAD ON *.* TO syslogadmin@private;

REVOKE ALL PRIVILEGES ON syslog.* FROM sysloguser@private;
GRANT USAGE ON syslog.* TO sysloguser@private;
GRANT SELECT ON syslog.* TO sysloguser@private;
GRANT UPDATE ON syslog.users TO sysloguser@private;

REVOKE ALL PRIVILEGES ON syslog.* FROM syslogfeeder@mail;
GRANT USAGE ON syslog.* TO syslogfeeder@mail;
GRANT INSERT ON syslog.* TO syslogfeeder@mail;

GRANT ALL ON syslog.search_cache TO sysloguser@private;
GRANT SELECT ON syslog.user_access TO sysloguser@private;
GRANT ALL ON syslog.user_access TO syslogadmin@private;
GRANT SELECT ON syslog.actions TO sysloguser@private;
GRANT ALL ON syslog.actions TO syslogadmin@private;

Then use it:

mysql -uroot -p < dbsetup.sql

Now you should be able to login to your http:// ... /syslog with account admin/admin
But you will face an error since there is no entry yet in your db.

In Syslog node

Add to /etc/syslog-ng/syslog-ng.conf the example given in scripts/syslog.conf:

destination d_mysql {
   pipe("/var/log/mysql.pipe"
      template("INSERT INTO logs
      (host, facility, priority, level, tag, datetime, program, msg)
      VALUES ( '$HOST', '$FACILITY', '$PRIORITY', '$LEVEL', '$TAG', '$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC',
      '$PROGRAM', '$MSG' );\n") template-escape(yes));
}; 

And the log section but with our additional source:

log {
   source(s_all);
   source(net);
   destination(d_mysql);
};

Get inspired by scripts/syslog2mysql.sh to make an init.d script:

  • add option "-h sql.vlan2" to mysql client to connect to the remote host
  • save the password in a secured file instead of leaving it on the cmd line of mysql, e.g. /etc/syslog-ng/my.cnf with strich access rights (600 root.root)
  • script is based on /etc/init.d/skeleton but much more tricky to track PIDs of processes as mysql client is not a daemon!
[client]
password="bbbb"

The init.d script itself, to be stored in /etc/init.d/syslog2mysql

#! /bin/sh
# Author: Philippe Teuwen

# Do NOT "set -e"

PATH=/usr/sbin:/usr/bin:/sbin:/bin
DESC="Fetch queries from syslog-ng to mysql db"
NAME=syslog2mysql
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

# Exit if mysql client is not installed
[ -x "/usr/bin/mysql" ] || exit 0

# Load the VERBOSE setting and other rcS variables
[ -f /etc/default/rcS ] && . /etc/default/rcS

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
        [ ! -e /var/log/mysql.pipe ] && echo " (Creating $NAME pipe)." && mkfifo /var/log/mysql.pipe
        if [ -e $PIDFILE ]; then
            if ps -p $(cat $PIDFILE) >/dev/null; then
                echo -n -e "\nError: $NAME seems to be already running!"
                return 1
            else
                rm -f $PIDFILE
            fi
        fi
        {
            while [ -e /var/log/mysql.pipe ]
            do
                mysql --defaults-file=/etc/syslog-ng/my.cnf -u syslogfeeder -h sql.vlan2 syslog < /var/log/mysql.pipe >/dev/null
                sleep 1
            done
        } &
        echo $! > $PIDFILE
}

#
# Function that stops the daemon/service
#
do_stop()
{
        if [ -e $PIDFILE ]; then
            PID=$(cat $PIDFILE)
            if ps -p $PID >dev/null; then
                # get PID of mysql child
                CPID=$(pgrep -P $PID)
                # kill syslog2mysql script
                kill $PID
                # kill mysql child
                kill $CPID
                rm -f $PIDFILE
                return 0
            else
                echo -e "\nWarning: $NAME was not running."
                echo -n -e "\nCleaning PID file"
                rm -f $PIDFILE
                return 1
            fi
        else
            echo -n -e "\nWarning: $NAME was not running"
            return 1
        fi
}

case "$1" in
  start)
        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
        do_start
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  stop)
        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
        do_stop
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  restart|force-reload)
        #
        # If the "reload" option is implemented then remove the
        # 'force-reload' alias
        #
        log_daemon_msg "Restarting $DESC" "$NAME"
        do_stop
        case "$?" in
          0|1)
                do_start
                case "$?" in
                        0) log_end_msg 0 ;;
                        1) log_end_msg 1 ;; # Old process is still running
                        *) log_end_msg 1 ;; # Failed to start
                esac
                ;;
          *)
                # Failed to stop
                log_end_msg 1
                ;;
        esac
        ;;
  *)
        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
        exit 3
        ;;
esac

:

And create the links to run the script at startup:

update-rc.d syslog2mysql defaults

TODO

  • source IP of zeus seems to be 100
  • fwlogwatch?