USB armory

my personal notes about USB armory

Hardware

• Freescale i.MX53 ARM® Cortex™-A8 800MHz
• 512MB DDR3 RAM

Links

• main page
• crowd funding
• wiki
  • Host communication
  • GPIOs
  • Applications
• alt wiki
• forum
• HW/SW source
• U-Boot
• Initial SDcard image notes

Quick setup

Set manual ip to usb0: 10.0.0.2, no routing, no DNS, via NotworkManager or:

/sbin/ip link set usb0 up
/sbin/ip addr add 10.0.0.2/24 dev usb0

Give connectivity to USB armory

/sbin/iptables -t nat -A POSTROUTING -s 10.0.0.1/32 -o wlan0 -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward

Connect

ssh usbarmory@10.0.0.1 # pwd usbarmory

Setup time (required at each boot if you don't use a daemon)

ssh usbarmory sudo date --set $(date +@%s)

Or via ShellInABox: https://10.0.0.1:4200/