Android

From YobiWiki
Jump to navigation Jump to search

Links

App stores

Alternate views on the official market:

Alternate markets:

User manuals

Nexus S

Versions

physical sticker behind battery

  • Model: GT-I9023
  • FCC ID: A3LGTI9023
  • SSN: -I9023GSMH
  • IMEI: xxxxxxx
  • S/N: xxxxxxx

under fastboot, stock

  • Product name - HERRING
  • HW Version - rev 52
  • Bootloader version - I9020XXKA3
  • Baseband version - I9020XXKB3
  • Carrier info - EUR
  • Serial number - xxxxxxx

under fastboot, after upgrade to 2.3.4

  • Baseband version - I9020XXKD1
  • Carrier info - EUR

under 'About phone' from the settings, stock 2.3.3

  • Android 2.3.3
  • Baseband I9023XXKB3
  • Kernel 2.6.35.7-g1d030a7
  • Build GRI54

under 'About phone' from the settings, after upgrade to 2.3.4

  • Android 2.3.4
  • Baseband I9023XXKD1
  • Kernel 2.6.35.7-ge382d80 android-build@apa28 #1
  • Build GRJ22

USB permissions on the host

On the host, example how to solve permissions:
Create /etc/udev/rules.d/99-android.rules for Nexus phones: 

SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bb4", ATTRS{idProduct}=="0fff", MODE="0666", OWNER="<your_account>" # Nexus One Fastboot
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e11", MODE="0666", OWNER="<your_account>" # Nexus One Normal
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e12", MODE="0666", OWNER="<your_account>" # Nexus One Debug/Recovery
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e20", MODE="0666", OWNER="<your_account>" # Nexus S Fastboot
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e21", MODE="0666", OWNER="<your_account>" # Nexus S Normal
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e22", MODE="0666", OWNER="<your_account>" # Nexus S Debug/Recovery
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e23", MODE="0666", OWNER="<your_account>" # ???
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4e24", MODE="0666", OWNER="<your_account>" # Nexus S USB tethering
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bb4", ATTRS{idProduct}=="0c8b", MODE="0666", OWNER="<your_account>" # HTC Normal

Then execute /etc/init.d/udev reload

Restoring factory ROM (2.3.3)

Warning, it will destroy everything, make your backups first!!

  • Get firmware here for a European Nexus S i9023, mine needs the I9023XXKB3 one.
  • Rename tar.md5 as tar
  • Get Odin sw from here, choose i9023
    • e.g. I9003_Odin3_v1.82.rar & SAMSUNG_USB.rar
  • Run Odin (works in a virtualbox if needed), load the 4 files:
    • bootloader: I9023_EUR_GRI54_XXKB3/I9023_EUR_GRI54_XXKB3/Bootloader_I9023XXKA3.tar
    • PDA: I9023_EUR_GRI54_XXKB3/I9023_EUR_GRI54_XXKB3/PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar
    • Phone: I9023_EUR_GRI54_XXKB3/I9023_EUR_GRI54_XXKB3/MODEM_I9023XXKB3_REV_00_CL912571_SIGNED.tar
    • CSC: I9023_EUR_GRI54_XXKB3/I9023_EUR_GRI54_XXKB3/DGS_I9023_EUR.tar
  • Turn phone off
  • Plug USB
  • Just before battery icon showing, enter download mode by pressing middle of volume up / volume down button for long, you'll get a big yellow warning triangle
  • If using virtualbox, bring USB device (Samsung serial) to virtualbox
  • Now Odin should show a yellow rectangle with COM0
  • Press "start" in Odin

Sources:

Restoring (most of) factory ROM (2.3.3) with fastboot

Ok previous section was about restoring *everything* as genuine but it requires Windows and most of the time all you screwed up was the boot image, the recovery image or the system image so here is how to restore them or part of them provided that you can still enter fastboot: 

fastboot oem unlock                  # if needed
fastboot flash recovery recovery.img # from Samsung PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar
fastboot flash system system.img     # from Samsung PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar
fastboot flash boot boot.img         # from Samsung PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar

Warning: I got /sdcard content erased, maybe because I tried to enter the native recovery, but anyway, make backups first before trying anything you risk regretting!!!

E.g. to make a backup with clockwordmod:

  • Put phone into fastboot mode
  • Enter recovery
  • Choose backup & restore / backup
  • Choose mount / mount USB storage
  • From host: copy clockwordmod/backup/*

Entering fastboot mode

  • Power off phone
  • Press Volume up and power button together for long
  • You've entered fastboot
  • Alternatively, fastboot can be triggererd from adb: adb reboot-bootloader

For getting fastboot on the host, see further below

Rooting 2.3.3

!! Don't touch boot image or try CW 3.0.0.0, one of them caused the phone to not start android anymore, I had to perform the full factory restore with Odin !!

  • enter recovery mode from fastboot
    • You can make a backup now
    • install zip from sdcard -> choose -> su-2.3.6.1-ef-signed.zip
    • reboot

Sources:

Upgrading to 2.3.4

A new version was announced (fr) two days ago.
Official way is apparently to type "*#*#2432546#*#*" while using Wi-Fi but all I got was a "checkin succeeded" notification. Anyway patched won't apply cleanly on my rooted phone so better to do it manually.
For GRI54, update.zip is available here.
I tried to apply it but there are several caveats given the previous hacks:

  • boot.img: to be able to patch it I've to restore the original boot.img, loosing temporarily the ro.secure=0 setting (cf "adb as root" paragraph). And failing to patch it would probably mean non-bootable as we would have missed replacing the kernel!
  • radio.img: hash checksum failed, it seems to indicate that expected radio.img is not the one I have.
  • recovery.img: we want to keep the clockworkmod one, so we just skip it for now

To apply those change this means:

  • fastboot flash boot boot.img (from PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar)
  • edit update.zip to remove radio.img, recovery/ and edit META-INF/com/google/android/updater-script
    • remove all commands about radio & recovery patch
    • add following line to keep rooted: set_perm(0, 0, 6755, "/system/bin/su");
    • if that line is not added, patched phone will not be rooted anymore, which can be easily fixed by applying the su..zip again
  • upload update.zip to /sdcard and apply zip via clockworkmod recovery, it'll skip signature verification by default

Ok now we got a system & boot images upgraded to 2.3.4
We can again modify boot.img to restore ro.secure=0:

  • Extract patched 2.3.4 boot.img (cf below, or use clockworkmod), modify it & flash it back

I also wanted to patch the stock recovery image, just to get a 2.3.4 stock recovery in case of.

  • Install the 2 files from update.zip#recovery/ into /system and chmod 755 /system/etc/install-recovery-sh
  • Restore the stock 2.3.3 recovery.img from PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar: adb push recovery.img /sdcard/
  • If you've flash_image on the phone you can try: flash_image recovery /sdcard/recovery.img
  • Else:
fastboot erase recovery
fastboot flash recovery recovery.img
  • Reboot the phone & start Android
  • It should be done, recovery should have been patched, you can remove the 2 files we've put in /system and extract the patched recovery image manually (cp /dev/mtd/mtd3 /sdcard/recovery.img). Hash changed so I assume it's properly patched
  • Restore clockworkmod recovery image

What's new?
I didn't mention it but with 2.3.3 I had two problems I was still busy trying to solve: GPS never fixing, zero satellite! And no way to see I get copy-protected applications (and that's not because of rooting the phone, on a stock phone it failed too).
Now GPS fixed quite fast with 2.3.4 and I could for the first time see & download copy-protected apps \o/ (even when the phone was rooted again).

UPDATE
here is the full ROM update, apparently with a new radio which should be ok for all phones...
Seen in this thread.

Extracting manually images from phone

On root shell on the phone: 

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00200000 00040000 "bootloader"
mtd1: 00140000 00040000 "misc"
mtd2: 00800000 00040000 "boot"
mtd3: 00800000 00040000 "recovery"
mtd4: 1d580000 00040000 "cache"
mtd5: 00d80000 00040000 "radio"
mtd6: 006c0000 00040000 "efs"
# cat /dev/mtd/mtd5 > /sdcard/radio.img

etc

Android 2.3

Getting fastboot & Android sources

There are several binaries around but I wanted to build my own. Maybe not the shortest way... I downloaded all android sources...
cf http://source.android.com/source/downloading.html
Some missing deps on my 64-but debian when I tried to compile everything: gperf, libc6-dev-i386, lib32ncurses5-dev ia32-libs g++-multilib lib32z1-dev lib32readline6-dev 

. build/envsetup.sh
lunch crespo-eng
make -j2

Maybe we can just compile adb & fastboot: 

make adb
make fastboot

cf http://www.cduce.org/~abate/build-android-adb-debian-sid-amd64

Getting adb & Android SDK

Get it from http://developer.android.com/sdk/index.html
Run tools/android -> get Android SDK Platform-tools, revision 3
It brings also adb but not fastboot
If you want to update SDK: tools/android update sdk

adb

You need to activate USB debugging:

  • Settings > Applications > Development > USB debugging

Some examples:

  • adb devices
  • adb shell
  • adb logcat

adb as root

Once the phone is rooted, you can, from a shell with e.g. adb shell invoke "su" & get root.
But to get immediately into root, the file /default.prop needs to contain ro.secure=0
But that file is restored from boot.img at each boot so you need to modify that one
See http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack%2C_Edit%2C_and_Re-Pack_Boot_Images#Alternative_Method
but there is also abootimg in debian:

  • Taking the boot.img from Samsung (see above in I9023_EUR_GRI54_XXKB3/I9023_EUR_GRI54_XXKB3/PDA_SOJU_GRI54_TMO_EUR_MR1_SIGNED.tar).
abootimg -x boot.img
mkdir ramdisk
cd ramdisk
gzip -dc ../initrd.img | cpio -i
sed -i default.prop 's/ro.secure=1/ro.secure=0/'
find . -print|cpio -o -Hnewc|gzip > ../initrd.img2
cd ..
abootimg -u boot.img -r initrd.img2
fastboot flash boot boot.img

For the last command, the phone needs of course to be in fastboot mode
Reboot phone
I had to re-enable USB debugging but now adb shell brings me immediately a root shell :)
Note that link mentioned above proposes an alternative way to flash the boot partition, directly from adb shell as root

Without this setup, it's a bit cumbersome to automate root commands from host, it looks like 

adb shell su -c "netcfg usb0 dhcp"

and the SuperUser app prompts you for confirmation on the phone for each new command

Got a failure when trying to flash back a 8Mb boot.img?
From example above I started from a boot.img smaller than the full boot partition but if you create a new boot.img or start from an image of the full partition taken manually or with clockworkmod, boot.img will be 8Mb-large (8388608) and fastboot fails with "FAILED exceed blocks 0x00000020 > 0x0000001e".
I'm not really sure about what size the file should be but as it's filled with zeroes till reaching 8Mb, I decided to cut it:
0x00000020 => 0x0000001e means for me 8388608 / 0x20 * 0x1e = 7864320, so I did: 

dd if=boot.img of=boot2.img bs=262144 count=30 
fastboot flash boot boot2.img

And it worked!

Images structure

You may want to explore .img content (from backups, stock ROMs etc).
Actually all .img are not the same

bootloader.img

/dev/mtd/mtd0
Unknown format

radio.img

/dev/mtd/mtd5
Unknown format, for baseband

recovery.img

/dev/mtd/mtd3
Unknown format

boot.img

/dev/mtd/mtd2
See here for details on the structure, and abootimg on Debian

system.img

Yaffs2 image, can be unpacked with unyaffs
Note that unyaffs failed unpacking stock system.img 2.3.3 & userdata.img but works fine on clockworkmod backups

data.img

Yaffs2 image, can be unpacked with unyaffs

cache.img

/dev/mtd/mtd4
Yaffs2 image, can be unpacked with unyaffs

misc

/dev/mtd/mtd1
Not backuped by clockworkmod

efs

/dev/mtd/mtd6
Yaffs2 image, can be unpacked with unyaffs
Not backuped by clockworkmod
Contains stuffs linked to baseband & bluetooth

Screenshots

Run ddms (from SDK) -> Tools / Device / Screen capture

USB tethering

Plug phone & PC via USB
Activate USB tethering (Settings / Wireless & networks / Tethering / USB Tethering)
It works OOB on Debian, nothing to do

Getting busybox

Need rooted phone, see above
Google's stripped busybox, called toolbox, is far from enough once you get a shell on the phone

Examples to use busybox versions instead of toolbox versions when the command exists twice: 

# busybox mount -o remount,rw /system
# /system/xbin/mount -o remount,rw /system

Wi-Fi & client certs

To be able to authenticate to a Wi-Fi network using client certificates via TLS:
If needed, export certificate from IE in Pkcs#12 PFX, *with* private key, *with* all certs, *without* strong enc, *without* deletion of private key.
Rename .pfx file as .p12
(source: http://www.google.com/support/mobile/bin/answer.py?answer=168466&topic=27214#1086573)
Copy pkcs#12 certificate to root of USB storage.
File must end with .p12, not .pfx!
One single file with key+cert+cacerts is ok
Wi-Fi params: 802.1x EAP / TLS / phase2: None / CA cert: cf previous import / user cert: idem / Identity: DOMAIN\user... / Anonymous id: empty / password:...

Note that after each reboot, you'll have to select manually one of the protected networks to unlock the secure storage of personal certificates or open manually the certificates storage:
Settings > Location & Security > Use secure credentials
See also Keystore Unlocker

Importing certs

I could only manage it via a webserver & crafted headers: 

<?php
header("Content-Type: application/x-x509-ca-cert");
?>
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----

You may try this free service: http://www.realmb.com/droidCert/ which seems to do the same.
But even if imported they seem not to be used e.g. for IMAP TLS.

Importing CA certs in /system

Source: CACert wiki.
You don't need the full Android SDK, just adb binary.
I'm not sure if it's really the proper way but to get recognized the BouncyCastle lib which was already on my system I did 

sudo ln -s /usr/share/java/bcprov.jar /usr/lib/jvm/java-6-sun-1.6.0.24/jre/lib/ext/


Adding CACert certificates: 

adb pull /system/etc/security/cacerts.bks
wget http://www.cacert.org/certs/root.crt
wget http://www.cacert.org/certs/class3.crt
keytool -keystore cacerts.bks -storetype BKS -provider org.bouncycastle.jce.provider.BouncyCastleProvider -storepass changeit -importcert -trustcacerts -alias CACERT -file root.crt
keytool -keystore cacerts.bks -storetype BKS -provider org.bouncycastle.jce.provider.BouncyCastleProvider -storepass changeit -importcert -trustcacerts -alias CACERT3 -file class3.crt 
adb shell busybox mount -o remount,rw /system
adb push cacerts.bks /system/etc/security
adb shell busybox mount -o remount,ro /system

Now my IMAP TLS which is using a CACert-signed certificate works with strict TLS setting on the phone, cool!

Applications

Here is a list of potentially useful applications

Only for root

Those apps require to run on a rooted phone

With root support

Those apps benefit from running on a rooted phone

  • Root Explorer, nice file explorer with file editor etc
  • Ghost Commander
    • Nostalgic of Norton Commander? Using Midnight Commander? It's for you!
    • Root support: access system files, remount system as RW, etc
    • There is also an addon for SMB support
  • SSHDroid, ssh server
    • First time: ssh-copy-id root@192.168.1.4 (default owd is admin) then go to options to start automatically, disable pwd auth and enable shared keys auth. Displaying authorized keys from GUI fails but auth works properly.


Belgium-related

Brussels

Belgian Transportations

Belgian Media & Culture

Belgian phone directories

  • 12-12 : public phone directory
  • 1307 : public phone directory
  • goldenpages.be : yellow and white pages phone directory

Belgian misc

  • Belgacom Apps Guide : Provides a list of nice Belgian apps, that's how I discovered some of those on this list
  • Brut-Net BE : Compute net wage from gross pay
  • myShopi : Shopping list
  • Parcels : Delivery tracking, supports many providers including Belgian ones
  • PharmaMob : Localize closest all-night drugstore
  • ping.ping : payment application
  • Suivi par Droïd : Delivery tracking, supports many providers including Belgian ones

Network

  • 2G-3G OnOff : widget to add a shortcut to the settings to enable/disable data
  • 3G Watchdog : Monitor data consumption
  • Quickteth : for an easy shortcut to USB tethering (add widget to desktop)
  • APNdroid : Control data connections over 3G
  • iPerf : iperf client to measure connection throughput
  • Speed Test : Measure connection throughput

Google

  • Google Goggles (Google)
  • Google Earth (Google)
  • Google Maps (Google)
  • Google Search (Google)
  • Google Sky Map (Google)
  • Google Traduction (Google)
  • Gmail (Google)
  • Youtube
    • On Nexus S I had a problem Market told me it was installed even if not showing up. With a file explorer go to /system/app and click on Youtube.apk to re-install it. Source: here

Alternatives to default apps

  • Dialer One : Alternative dialer

Dictionaries

  • Dictionnaire Littré (Alexis Robert)
  • Van Dale French-Dutch (Paragon Software)
  • Van Dale English-Dutch (Paragon Software)
  • Van Dale Dutch Pocket (Paragon Software)
  • Van Dale German-Dutch (Paragon Software)
  • QuickDic German Dictionary (Thad Hughes)

Sensing

  • Boussole (Catch.com ; compass)
  • Shazam : Can identify music by listening to it for about 10s
  • Barcode Scanner (ZXing Team)
  • Wifi Analyzer (farproc)
  • GPS Status (EclipSim)

Open Source applications

GPS with offline maps

Commercial

  • Copilot Live (59€ for Europe)
  • Tomtom planned for next HTC phones, with free map of the country of purchase

Free

From this post:
Create your own maps with Mobile Atlas Creator (Java-based) & use them e.g. with RMaps, AndNav, Maverick, TrekBuddy,... (bitmaps so ok only for small areas such as cities)

  • Get e.g. RMaps from Android Market
  • Get latest release of Mobile Atlas Creator & unzip it
  • Get latest SqliteJDBC library and copy it inside th eMobile Atlas Creator directory
  • Run it (start.sh)
  • Choose your source, e.g. OpenStreetMaps, Google Maps,...
  • Select area: Right click to Drag, Scroll to zoom In/Out, Left click to select downloadable area
  • Select one or more zoom levels, e.g. from 12 to 18 for all levels of details of a city
  • Do “add selection” with a name of your choice
  • Select “BigPlanet SQLite” from “Atlas Settings” (for RMaps, otherwise Maverick Atlas Format for Maverick etc)
  • "Create Atlas"
  • Download the .sqlitedb map into the phone SDcard/rmaps/maps
  • Disconnect the phone
  • Open RMaps and Menu > More > Settings > User defined maps > BigPlanet_maps.sqlitedb > Enabled Maps
  • Return to main maps screen and then Menu > Maps > BigPlanet_maps.sqlitedb.

Free Navit - OSM

  • Install Navit from here
  • Install preprocessed OSM map from here and put it as /sdcard/navitmap.bin
Retrieved from "https://wiki.yobi.be/index.php?title=Android&oldid=7156"