IPv6

IPv6 under Linux

Links

Brokers

Gogo6 / Freenet6

http://gogonet.gogo6.com

apt-get install gogoc

Anonymous

Edit /etc/gogoc/gogoc.conf and verify you've:

server=anonymous.freenet6.net
auth_method=anonymous

Registered

You need a freenet6 account: http://gogonet.gogo6.com/page/freenet6-account
Your Freenet6 account will also be your domain name, for example me.broker.freenet6.net Edit /etc/gogoc/gogoc.conf and set:

userid=xxx
passwd=xxx
server=authenticated.freenet6.net
auth_method=any

But... if you want to be certain that you get a static address then your choise is montreal.freenet6.net , amsterdam.freenet6.net, sydney.freenet6.net or taipei.freenet6.net. (from here

From README.Debian: If you use the authentication methods to login to the broker, you will need to get the server key. The program will check for the correct key and not start without it. To obtain the key, run /usr/sbin/gogoc on the command line and agree to add the key

sudo gogoc -n

Commands

traceroute6 -n www.kame.net
ping6
netcat6 - TCP/IP swiss army knife with IPv6 support
mrd6 - IPv6 Multicast Routing Daemon
ndisc6 - IPv6 diagnostic tools
ndisc6 gathers a few diagnostic tools for IPv6 networks including:
- - ndisc6, which performs ICMPv6 Neighbor Discovery in userland,
- - rdisc6, which performs ICMPv6 Router Discovery in userland,
- - rltraceroute6, a UDP/ICMP IPv6 implementation of traceroute,
- - tcptraceroute6, a TCP/IPv6-based traceroute implementation,
- - tcpspray6, a TCP/IP Discard/Echo bandwidth meter,
- - addrinfo, easy script interface for hostname and address resolution,
- - dnssort, DNS sorting script.
ipv6calc - small utility for manipulating IPv6 addresses
subnetcalc - IPv4/IPv6 Subnet Calculator

Tutorials

GLMF #136

http://formation-libre.fr/articles/ in French, complementary to articles published in GLMF

Relies on Netkit, so I chose to run the livecd iso (from here) in Virtualbox

Netkit base commands: vstart, vlist, vconfig, vhalt, vcrash, vclean
Netkit advanced commands: lstart, lhalt, lcrash

Once the iso booted in Virtualbox, open a user shell and type

wget http://formation-libre.fr/foad/static/labs/art1-lab-commande-ip6.tar.bz2
tar xjf art1-lab-commande-ip6.tar.bz2
cd lab-commande-ip6
lstart

Commands illustrated in the tutorial:

ifconfig
= ip addr show
ifconfig ethx inet6 add 2001:.../64
= ip addr add 2001:.../64 dev eth0
ifconfig ethx inet6 del 2001:.../64
= ip addr del 2001:.../64 dev eth0

route -n -A inet6
= ip -6 route show
route -A inet6 add 2001:.../64 gw 2001:...
= ip route add 2001:.../64 via 2001:...
route -A inet6 del 2001:.../64 gw 2001:...
= ip route del 2001:.../64 via 2001:...
route -A inet6 add default gw 2001:...
= ip route add default via 2001:...
route -A inet6 del default gw 2001:...
= ip route del default via 2001:...

ping6 on local link: need to specify device

ping6 -I ethx fe80:...
= ping6 fe80:...%ethx

Basic router: static routes +

echo 1 > /proc/sys/net/ipv6/conf/all/forwarding

Neighbors discovery:

ping6 -I ethx ip6-allnodes
= ping6 -I ethx ff02::1

Neighbors cache:

ip neigh show

IPv6

Contents