Tomtom ONE IQ Routes
Description
Tomtom ONE IQ Routes - 2GB
On version page (in French here):
Appareil XXXXX XXXXX (sorry, confidential!) App 8.411 (1219/090319) OS : 301792 64 Mo de RAM (disponible : 22.2 Mo) GPS v1.20, Boot 5.5128 Carte: 'Western_and_Central_Europe_2GB' v825.2157 Langue: Français
On box, commercial ref.:
4EK0.001.01
Probably very similar to this description
Working with Linux?
Status
Well it seems latest versions of Tomtom HOME don't work yet.
You can install it under wine but it doesn't recognize that the device is plugged in so it's pretty useless.
aptitude install wine-unstable lib32nss-mdn cabextract wget http://www.kegel.com/wine/winetricks sh winetricks vcrun2005sp1 cd /media/INTERNAL wine InstallTomTomHOME.exe
I also tried Maxibox:
- See http://www.tomtomax.fr/exclu-tomtomax.html#maxi-box
- wine says we need msvbvm60.dll, you can get it here and put it in the Tomtom dir ~/.wine/drive_c/Program Files/Tomtomax Maxi-Box
- Also unable to find the device :(
Misc links
Beware some are probably referring to the older Tomtom One!
- http://www.winehq.org/pipermail/wine-users/2007-January/024338.html
- http://forum.mandriva.com/viewtopic.php?t=113722&start=0&postdays=0&postorder=asc&highlight=&sid=9b806e2fb9c5d97c1fbdef2daba2cc88
- http://archives.free.net.ph/message/20081122.202356.5f40441e.da.html
Mass storage
At least it appears just as a mass storage under Linux so you can backup, copy files etc.
- Connect Tomtom to PC.
- Turn Tomtom on
- Choose to connect to PC.
kernel: usb 6-2: new full speed USB device using uhci_hcd and address 16 kernel: usb 6-2: New USB device found, idVendor=1390, idProduct=0001 kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kernel: usb 6-2: Product: ONE IQ Routes kernel: usb 6-2: Manufacturer: TomTom kernel: usb 6-2: SerialNumber: PSnnnnCnnnnn kernel: usb 6-2: configuration #1 chosen from 1 choice kernel: Initializing USB Mass Storage driver... kernel: scsi6 : SCSI emulation for USB Mass Storage devices kernel: usbcore: registered new interface driver usb-storage kernel: USB Mass Storage support registered. kernel: usb-storage: device found at 16 kernel: usb-storage: waiting for device to settle before scanning kernel: usb-storage: device scan complete kernel: scsi 6:0:0:0: Direct-Access TomTom ONE IQ Routes 6209 PQ: 0 ANSI: 2 kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0 kernel: sd 6:0:0:0: [sdb] 4014080 512-byte hardware sectors: (2.05 GB/1.91 GiB) kernel: sd 6:0:0:0: [sdb] Write Protect is off kernel: sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through kernel: sdb: sdb1 kernel: sd 6:0:0:0: [sdb] Attached SCSI removable disk
Output of fdisk print:
Disk /dev/sdb: 2055 MB, 2055208960 bytes 64 heads, 63 sectors/track, 995 cylinders Units = cylinders of 4032 * 512 = 2064384 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 995 2005797+ 6 FAT16
Disk label is apparently "INTERNAL"
Working with Windows
As we don't have choice...
If you're behind a proxy you'll experience this:
Tomtom plugged in -> Start Installer -> connection error
Download and execute manually http://download.tomtom.com/sweet/application/home2latest/TomTomHOME2winlatest.zip
It'll install and then give again an error -> ok -> Tools -> Connection -> Proxy
After the Tomtom was plugged and software was installed, Windows wanted to reboot because of a new driver installed, typical...
Software Upgrades
8.414
So I finally connected the device to a Windows box and let it upgrade whatever it wanted (you don't need to login to do that apparently).
The changelog didn't show yet what were the improvements
Now it shows (for what changed):
App 8.414 (1239/090707) OS : 320300 GPS v1.20, Boot 5.5130
Latest Map Guarantee
I was a bit surprised that even after having linked my device with my account it proposed to buy map updates while I was supposed to get them for free the first time.
Then I discovered the menu option Tools -> Use Latest Map Guarantee -> Get it now
Note that you can only use it once and only in the first sth (3 months?) after having bought it.
See below for the failure I had after an update, it worked better when I removed first the old map (but beware it also removes your favorites etc so make a backup first!)
New map was 200Mb larger but it came with... 200Mb of cspeech_XXX.dat files which are probably the TTS data, useless for my model so I can probably remove them.
Applications
Links
Beware it's maybe compatible only with previous Tomtom One versions!!
- http://home.comcast.net/~spheasant1/3rd_party.html
- http://www.tomtomax.fr/index.html
- http://www.webazar.org/tomtom/plugins.php
- http://gps.dg4sfw.de/
TTconsole
TTconsole, to get virtual keyboard, click on upper right corner (but extreme right was inactive on my setup, I've to click sth like 5mm away from the right border.
Keyboard is qwertz, argh. ( > is shift+<, / is shift+7, = is shift+0)
uname -a
Linux (none) 2.6.13-tt320300 #1 Tue Jul 7 15:25:59 CEST 2009 armv5tejl unknown
/proc/cpuinfo
Processor : ARM926EJ-Sid(wb) rev 5 (v5l) BogoMIPS : 131.48 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 5 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 8192 I assoc : 4 I line length : 32 I sets : 64 D size : 8192 D assoc : 4 D line length : 32 D sets : 64 Hardware : TomTom GO Revision : 0011 Serial : 0000000000000000
dmesg
04 Simtec Electronics Detected type 34, name TomTom ONE IQ Routes Edition On node 0 totalpages: 16384 DMA zone: 16384 pages, LIFO batch:7 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists Kernel command line: console=/dev/null quiet irq: clearing subpending status 00000406 irq: clearing subpending status 00000002 PID hash table entries: 512 (order: 9, 8192 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB = 64MB total Memory: 54784KB available (2026K code, 415K data, 92K init) Calibrating delay loop... 131.48 BogoMIPS (lpj=328704) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok unpacking initramfs... done Freeing initrd memory: 7168K NET: Registered protocol family 16 S3C Power Management, (c) 2004 Simtec Electronics S3C2412: Initialising architecture S3C2412: IRQ Support S3C2412: Clock Support, UPLL 96.000 MHz S3C24xx CpuFrequency Scaling (DVS), (c) 2008 TomTom B.V. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized S3C DMA Driver, (c) 2003-2004 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 ngffs: init_ngffs_fs: NGFFS initializing TomTom GO Backlight S3C, (C) 2007 TomTom BV Activate backlight_en TomTom GO Framebuffer Driver, (C) 2005 TomTom BV ttgfb: ttgfb_alloc: Using LFB from bootloader (reserved memory). S3C2410 RTC, (c) 2004 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics S3C2412 EVT3 Watchdog Workaround, (c) 2006 TomTom S3C24XX Internal Flash poweroff workaround, (c) 2008 TomTom TomTom GO Hardware Detection Driver, (C) 2004,2005 TomTom BV TomTom GO ADC Driver, (C) 2004-2007 TomTom BV TomTom GO S3C24XX Generic ADC Driver, (C) 2007 TomTom BV TomTom GO GPIO Driver, (C) 2004,2005 TomTom BV gpio_hw_init: UART 'ttySAC0' => 0 TomTom GO Accelerometer Driver, (C) 2004,2005 TomTom BV TomTom GO Battery Driver, (C) 2004,2005,2006,2007 TomTom BV TomTom GO GPS Driver, (C) 2004,2005 TomTom BV TomTom GO Touchscreen Input Driver, (C) 2007 TomTom BV Done CoolSound engine, (C) 2004,2005 TomTom BV dma2: IRQ with no loaded buffer? CoolSound: sound_dma_init: Buffers allocated and associated. reallocating sound DMA buffer (previous:0 new:4096 allocating:65536) reallocating sound DMA buffer (previous:0 new:4096 allocating:65536) iis2410: iis_init: Current clock rate: 66000000 TomTom GO Buzzer Driver, (C) 2006 TomTom BV TomTom GO Gyro Driver, (C) 2007 TomTom BV TomTom GO Legacy USB mode detect, (C) 2007 TomTom BV (usbmode:) usbmode: Probing usbmode: Initialized usbmode: register_usbmode_driver TomTom S3C24XX USB mode driver, (C) 2007 TomTom BV (s3c24xx_usbmode:) TomTom GO Buspower monitor, (C) 2007 TomTom BV (buspower:) buspower: buspower_probe Done Valencia/Murcia dock driver - v1.0 Cagliari dock driver - v1.0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled s3c2412-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412 s3c2412-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412 s3c2412-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412 io scheduler noop registered io scheduler deadline registered RAMDISK driver initialized: 16 RAM disks of 7168K size 1024 blocksize PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx TomTom GO IDE Driver, (C) 2004,2005 TomTom BV physmap flash device: 80000 at 0 Found: EON EN29LV400BB number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for CP2101 usbcore: registered new driver CP2101 drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.04 s3c2412-i2c s3c2412-i2c: slave address 0x08 s3c2412-i2c s3c2412-i2c: bus frequency set to 375 KHz s3c2412-i2c s3c2412-i2c: i2c-0: S3C I2C adapter Bluetooth: HCI USB driver ver 2.8 usbcore: registered new driver hci_usb Bluetooth: HCI UART driver ver 2.1 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Trying to set irq type for IRQ-1 s3c-sdi: probe: mapped sdi_base=f1200000 irq=83 irq_cd=4294967295 dma=0. s3c-sdi: initialization done. S3C2410 GPIO SPI Driver registering c02234dc: scp1000-baro TomTom GO SCP1000 Barometer Driver, (C) 2007 TomTom BV scp1000-baro: Missing platform data! registering c0223508: kxr94-gadc NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.4 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 usbmode: usbmode_late_init s3c24xx_usbmode: helper_disable_host_port s3c24xx_usbmode: s3c24xx_initial_to_idle s3c24xx_usbmode: idle_enter SUCCESS Freeing init memory: 92K Warning: unable to open /dev/console as initial console, res=-19. s3c24xx_usbmode: buspower_changed POWER EVENT usbmode: USB power off while in idle mode. (not expected) usbmode:[1,1] USB_STATE_IDLE==(USB_EVENT_POWER_OFF) NOP mmcblk0: mmc0:0001 AKG00M 2007040KiB mmcblk0: p1 FAT: free clusters recounted: 94354 FAT: filesystem 32 bits gps: gps_ioctl: WARNING: Ignoring IOW_GPS_OFF selected clock c022f084 (pclk) quot 428, calc 9600 selected clock c022f084 (pclk) quot 34, calc 115183 PORT_S3C2412 impossible RTS gpio mapping for port 1 gps: gps_ioctl: WARNING: Ignoring IOW_GPS_ON selected clock c022f084 (pclk) quot 428, calc 9600 selected clock c022f084 (pclk) quot 70, calc 57591 selected clock c022f084 (pclk) quot 106, calc 38394 selected clock c022f084 (pclk) quot 213, calc 19197 selected clock c022f084 (pclk) quot 34, calc 115183 selected clock c022f084 (pclk) quot 70, calc 57591 selected clock c022f084 (pclk) quot 428, calc 9600 selected clock c022f084 (pclk) quot 428, calc 9600 selected clock c022f084 (pclk) quot 70, calc 57591 selected clock c022f084 (pclk) quot 106, calc 38394 selected clock c022f084 (pclk) quot 213, calc 19197 selected clock c022f084 (pclk) quot 34, calc 115183 selected clock c022f084 (pclk) quot 70, calc 57591 selected clock c022f084 (pclk) quot 428, calc 9600
ps
PID Uid VmSize Stat Command
1 root 652 S /bin/sh /init
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
25 root SW< [kblockd/0]
28 root SW< [khubd]
82 root SW [pdflush]
83 root SW [pdflush]
85 root SW< [aio/0]
84 root SW [kswapd0]
154 root SW [mtdblockd]
176 root SW< [kmmcd]
182 root SW< [s3c24xx-spi-gpi]
185 root SW< [krfcommd]
192 root SW< [mmcqd]
273 root 572 S syslogd -C -S
280 root 404 S launchserver /var/run/launchsock
375 root 1480 S /bin/glgps normal
379 root 560 S /bin/ttpnpd
382 root 652 S /bin/sh /init
393 root 26648 R /bin/ttn
396 root 26648 S /bin/ttn
397 root 26648 S < /bin/ttn
398 root 572 S /bin/sh /mnt/sdcard/TTconsole/TTconso
399 root 540 S ./TTconsole/TTconsole
400 root 708 S /bin/sh
402 root 676 R ps ax
df
Filesystem 1k-blocks Used Available Use% Mounted on mtd0 256 4 252 2% /mnt/flash /dev/mmcblk0p1 2001868 1624408 377460 81% /mnt/sdcard
/mnt/flash
drwxr-xr-x 1 root root 0 Apr 9 2000 . drwxr-xr-x 5 root root 0 Jan 1 1970 .. drwx------ 1 root root 0 Aug 29 23:28 extra_settings -rw-r--r-- 1 root root 13 Apr 9 2000 restore1.dat -rw-r--r-- 1 root root 926 Jan 1 2000 settings.dat dr-xr-xr-x 1 root root 0 Jan 1 1970 sysfile -rw-r--r-- 1 root root 20 Jan 1 2000 testfile -rw-r--r-- 1 root root 4 Jan 1 2000 ttsys.dta
TTTracklog
And the extension with stop button
Height
As I've a small screen I had to edit Height/height.cfg -> d7 & n7
Misc
Reset
- Be sure the battery is full, leave it charging for at least 2 hours with the loading green LED turned on.
- Push on on/off button for more than 15 secs till it starts
Backup
full backup, partition image
It's very important to make a first backup of your Tomtom as soon as possible as I got my first problem very soon, see below.
To make the backup under Linux, ideally do it as very first time even before turning it on so you'll have the very initial image (change /dev/sdb to your own device):
For the mbr: (in principle the first 512 bytes are enough, the rest is filled with zeroes)
$ dd if=/dev/sdb of=tomtom-mbr.bin bs=512 count=245
For the filesystem:
Make sure your device is connected but not mounted!!!
$ dd if=/dev/sdb of=tomtom-sdb1.bin 4011595+0 records in 4011595+0 records out 2053936640 bytes (2.1 GB) copied, 3604.15 s, 570 kB/s
$ file sdb1
sdb1: x86 boot sector,
code offset 0x0, OEM-ID " ",
sectors/cluster 64,
root entries 512,
Media descriptor 0xf8,
sectors/FAT 245,
heads 64,
hidden sectors 245,
sectors 4011595 (volumes > 32 MB) ,
serial number 0x6f0ecbbd,
unlabeled,
FAT (16 bit)
full backup, on file basis
Actually I didn't do it like that, rather my device was automounted after I configured it so I copied the whole file structure manually to a ext3 partition. This was still ok to save my device when it crashed.
FYI a few files were already created/modified after the initial setup and usage:
Some files modified before the clock was set:
-rwxr-xr-x 1 phil phil 48 2000-04-09 14:02 CurrentMap.dat -rwxr-xr-x 1 phil phil 1515 2000-04-09 14:18 ttgo.bif -rwxr-xr-x 1 phil phil 632 2000-04-09 14:02 Western_and_Central_Europe_2GB/DeletedPoi.local -rwxr-xr-x 1 phil phil 48 2000-04-09 14:02 Western_and_Central_Europe_2GB/MapUserPatch.dat
And after the clock was set (here we check for files modified the last 5 days):
$ find . -type f -mtime -5 -exec ls -l {} \;
-rwxr-xr-x 1 phil phil 3 2009-08-29 19:21 itn/temporary.iti
-rwxr-xr-x 1 phil phil 2848 2009-08-29 18:19 Western_and_Central_Europe_2GB/MapSettings.cfg
-rwxr-xr-x 1 phil phil 844 2009-08-29 19:21 settings.dat
-rwxr-xr-x 1 phil phil 68 2009-08-29 18:19 UserPatch.dat
inc backup
Sometimes you want to see exactly those files who changed since last time (e.g. you added voices, POI,...)
You can copy the files from the Tomtom fs to have a first full backup (but not a partition image)
Then make from time to time other backups (without the big map files if you didn't change maps, to get quicker).
Then run dupemap from magicrescue to keep only the files which have changed since the initial backup:
dupemap -d tomtom-fs.orig.map scan tomtom-fs.orig dupemap -d tomtom-fs.orig.map delete,report tomtom-fs.incremental
Then prune empty directories:
Execute several times the following until you don't have error messages:
find . -type d -empty -exec rm -r {} \;
Files
- Favorites:
- <map-subdir>/MapSettings.cfg
- Map corrections by user:
- <map-subdir>/MapUserPatch.dat
- POI:
- <map-subdir>/<POIname>.bmp
- <map-subdir>/<POIname>.ov2
- poi/<POIname>.tlv
- Voices:
- voices/data<NN>.bmp
- voices/data<NN>.chk
- voices/data<NN>.tlv
- voices/data<NN>.vif
More info here
- for /text, here
How to create your own content: POI, voice, images, colour schemes, routes & map overlays
QuickGPSfix
I was surprised my QuickGPSfix was not updated anymore at a point in time, I don't remember how it happened.
The solution I found was to restore the old QuickGPSfix file I had from Tomtom Home application (Add traffic, Voices etc -> More -> More -> More -> items on my computer -> QuickGPSfix Data) then trigger "Update my ONE"
Speed cameras
- http://radars.bnet.be ?
- on Astel, integrated into POIedit
Failures!
Filesystem failure!
Well it didn't take long to have the first troubles, it happened before I did anything strange like adding applications or whatever:
I accidentally hitted the radar report (three clicks as same place on screen on the quick menu is all you need :( ) and wanted to remove it manually before connecting my Tomtom online. So I mounted the device under linux again and started a big "diff -Naur".
Then I discovered that there were strange new files in a subdirectory and when I started deleting those files I got a "read-only device" error.
After that, the Tomtom was rebooting in an endless loop :(
I solved the problem by doing the following:
I read that the device was sometimes slow and for sure the FAT16 didn't seem to be handled in a robust way so I preferred to prepare everything offline:
- Create an empty 2Gb file
dd if=/dev/zero of=tomtom-fixed.bin bs=512 count=4011595
- Format it (here I let the default FAT32, remember the original one was FAT16...
mkfs.vfat tomtom-fixed.bin
- Mount it loopback
mkdir tomtom-fixed mount -o loop tomtom-fixed.bin tomtom-fixed
- Copy files from my backup to the loopback mounted filesystem
- Make sure your device is connected but not mounted!!!
- Copy the new filesystem to the device (check what's your device link)
dd if=tomtom-fixed.bin of=/dev/sdb1
- Disconnect the device and let it reboot
Yes!!! it worked again, pfiuuuut!
Note that it's now FAT32 but I didn't change the partition table which still says FAT16:
Disk /dev/sdb: 2055 MB, 2055208960 bytes 64 heads, 63 sectors/track, 995 cylinders Units = cylinders of 4032 * 512 = 2064384 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 995 2005797+ 6 FAT16
Disk label is apparently empty now.
Infinite reboot after map update
After a "Latest Map Guarantee" update, the device never rebooted properly, sticking on Tomtom logo :(
I tried to reset it, keeping power button pressed, and got green screen (like if you fire only the green sub-pixels).
Back on computer, connection with Tomtom HOME was fine.
I noticed that size of the map in "items on device" was still the size of the previous smaller map.
So I chose to delete the map from the device then tried again the map update and then it finally worked again.
Deletion of the "previous" map deleted also my map favorites.
When I tried to reinstall the backup of MapSettings.cfg it failed again so apparently that was the cause of the problem.
I reinstalled the "empty" MapSettings.cfg that came with the Latest Map Guarantee update and it worked fine again.
So now how to re-import my old favorites (& home address BTW)?
Googling...
- This blog explains exactly the same issue, apparently an incompatibility between old mapsettings.cfg and new maps.
Her suggestion is to use POI to store favorites, mmm... - A solution is proposed on this forum:
- Copy again MapSettings.cfg to the device
- Launch Tomtom HOME
- Choose to operate your device remotely (this takes time to start)
- Now on your remote Tomtom screen, add a favorite & delete it, this "fixes" the file
- Now problem should be fixed, you're back with your favorites!
In the operation of deleting the old map and installing the new one, I lost also the speed cameras files & other POIs so I had to reinstall them from a previous backup