Arduino

From YobiWiki
Jump to navigation Jump to search

So after the Arduino workshop at BruCON 2009 (pics here), I was seduced by this little development board.

Links

boards & clones

Duemilanove (SmartProjects)

The Duemilanove automatically selects the appropriate power supply (USB or external power), eliminating the need for the power selection jumper found on previous boards. It also adds an easiest to cut trace for disabling the auto-reset, along with a solder jumper for re-enabling it.

based on the ATmega168, latest versions are based on ATmega328p

Clones:

  • Roboduino

Decimilia (SmartProjects)

Version before Duemilanove, with a jumper to select the power supply (USB or external power)

based on the Atmega168, can be upgraded with a ATmega328

Clones:

  • Freeduino V1.16 Board
  • Freeduino MaxSerial
  • HACEduino "2009"
  • Fino168 USB Board
    • with a DIP switch to disable auto-reset and D13 LED
  • Duino168 Serial Board
    • with a DIP switch to disable auto-reset and D13 LED
  • Duino328 Serial Board
    • with a DIP switch to disable auto-reset and D13 LED

Lilypad (SparkFun)

based on the ATmega168V on v03 (the low-power version of the ATmega168) or the ATmega328V on v04

Pro (SparkFun)

based on the ATmega168 or ATmega328. The Pro comes in both 3.3V / 8 MHz and 5V / 16 MHz versions. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a battery power jack, a power switch, a reset button, and holes for mounting a power jack, an ICSP header, and pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

The Arduino Pro is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with Arduino shields. The 3.3V versions of the Pro can be powered with a battery.

Pro Mini (SparkFun)

based on the ATmega168. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.

Nano (Gravitech)

small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one

Clones:

Mini (SmartProjects)

based on the ATmega168

the smallest of the serie. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the Mini USB adapter or other USB or RS232 to TTL serial adapter.

Mega (SmartProjects)

based on the ATmega1280

54 Digital I/O Pins (of which 14 provide PWM) / 16 Analog Input Pins

Other clones

  • iDuino, a breadboardable version
  • Really Bare Bones Board, minimalist, smallest one?
  • Maple, compatible with Arduino but powered by a 72MHz ARM core!
  • Wiseduino, an Arduino-compatible microcontroller board, which includes a DS1307 real time clock (RTC) with backup battery, a 24LC256 EEPROM chip and a connector for XBee adapter for wireless communication.

Officials

Documentation

Hardware

Shopping

Ethernet

Ethernet shield

LCD

  • Tutorial with LiquidCrystal library, for Hitachi HD44780 compatible LCDs

Misc links to explore

Arduino and Linux

Installation

Main instructions are here

As I'm using a Debian AMD 64bit, here is what I did:

Installing java from Sun and making sure it will be called by the tools. It might be that other java suites are working but at least java-gcj is missing a GtkLookAndFeel component that Arduino GUI is using
So if you don't have it yet: 

aptitude install sun-java6-jre


Then if it's not the one by default, change it: (maybe "java" is enough but let's be consistent) 

update-alternatives --config java
update-alternatives --config jar
update-alternatives --config keytool
update-alternatives --config orbd
update-alternatives --config rmid
update-alternatives --config rmiregistry
update-alternatives --config serialver

Other dependencies: 

aptitude install avr-libc gcc-avr

Arduino tools, here v0017: 

wget http://arduino.googlecode.com/files/arduino-0017.tgz
tar xzf arduino-0017.tgz

Arduino tools are coming only for 32bit but it contains only a few executables so let's install the 64bit version of those executables 

aptitude install librxtx-java
rm arduino-0017/lib/librxtxSerial.so

There is also the avrdude binary in arduino-0017 which is compiled as 32bit executable.
You can recompile it from the source or if you have the ia32-libs package, the 32bit binary provided will work out-of-the-box.
But in any ways, DON'T USE AVRDUDE FROM YOUR DISTRO! because the one provided with the Arduino tools is a patched version.

Now let's try to launch the script arduino-0017/arduino 

Tools/SerialPort/"/dev/ttyUSB0"
Tools/Board/"Arduino Diecimila, Duemilanove or Nanoe, w/ Atmega168"

Now trying the very first code:
See this tuto

Problem with the original avrdude

As I told in the previous section, don't use the avrdude coming with your distro. Initially this is what I did and here are the problems I faced: 

aptitude install avrdude avrdude-doc
cd arduino-0017/hardware/tools
mv avrdude avrdude.disabled
mv avrdude.conf avrdude.conf.disabled
ln -s /usr/bin/avrdude
ln -s /etc/avrdude.conf

DON'T USE AVRDUDE FROM YOUR DISTRO! Then when trying to upload the bin to the board (menu -> Upload to I/O board), I got the following message: 

Binary sketch size: 896 bytes (of a 14336 byte maximum)
avrdude: Yikes!  Invalid device signature.
       Double check connections and try again, or use -F to override this check.

Then I tried to inject the -F option to avrdude, it flashed the chip, gave me still errors: 

Wrong microcontroller found. Did you select the right board in the Tools > Board menu?
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATMEGA168 is 1E 94 06

But the code was apparently correctly uploaded to the board as I got my blinking LED...

Avrdude which is part of the arduino-0017 release is a patched version as it says: 

Version 5.4-arduino

While the version in Debian Squeeze is: 

Version 5.8

So apparently we need absolutely to use the special arduino version.

Projects

Brucon Blink blink

VFD brightness control

Yet another EMF detector

TODO & ideas

  • Intervalometer for my Canon EOS350D, see e.g. this one for Nikon
  • Temperature alarm for tea preparation
  • LED cube?
  • POV sth? sphere?
Retrieved from "https://wiki.yobi.be/index.php?title=Arduino&oldid=5984"