RFID
Hardware Tools
RFID killers
- http://www.acbm.com/inedits/rfid.html (French)
- WEAPONS: The RFID zapper
- RFID-Zapper(EN)
- RFIDwasher, if not hoax...
- TagZapper, if not hoax...
RFID skimmers
RFID readers
Parallax
http://www.makezine.com/06/theorypractice/ => See MAKE n6
OpenPCD
ACR122
based on PN532
- docs
- To get the Firmware version string in command line: (actual string here is "ACR122U203" as the last 2 bytes are not SW1/SW2 but part of the string)
opensc-tool -s FF00480000 Sending: FF 00 48 00 00. Received (SW1=0x30, SW2=0x33): 41 43 52 31 32 32 55 32 ACR122U2
Arygon ADRA
based on PN531
Omnikey 5321
Installing OmniKey reader under linux:
apt-get install libusb-dev pcsc-omnikey
Warning! this removes libccid!!
Note that there are also drivers here
It's better to keep libccid if needed and install the missing driver by hand:
cd ifdokrfid_lnx-2.6.0 sudo ./install -d /usr/lib/pcsc/drivers/
See here: you need also to recompile pcscd with libusb:
./configure --disable-libhal --enable-libusb
To do it by repackaging the Debian pcscd:
apt-get source pcscd apt-get build-dep pcscd
--- debian/rules 2009-01-14 13:54:42.000000000 +0100
+++ debian/rules 2009-01-14 13:46:56.000000000 +0100
@@ -38,6 +38,8 @@
dh_testdir
# we add LDFLAGS="-lpthread" for bug #253629
./configure $(confflags) \
+ --disable-libhal \
+ --enable-libusb \
--sysconfdir=/etc \
--prefix=/usr \
--enable-usbdropdir=/usr/lib/pcsc/drivers \
Then
dpkg-buildpkg -uc -us
To launch the modified pcsc in foreground, showing ADPUs and debug info: (here pcscd was installed in /usr/local/bin/pcscd-libusb)
pcscd-libusb -f -a -d
RFID emulators
Misc
Software Tools
librfid
librfid is a Free Software RFID library. It implements the PCD (reader) side protocol stack of ISO 14443 A, ISO 14443 B, ISO 15693, Mifare Ultralight and Mifare Classic. Support for iCODE*1 and other 13.56MHz based transponders is planned.
RFDump
RFDump is a backend GPL tool to directly interoperate with any RFID ISO-Reader to make the contents stored on RFID tags accessible.
RFIDIOt
RFIDIOt is an open source python library for exploring RFID devices
apt-get install python-pyscard $ ./mrpkey.py -L PCSC devices: No: 0 OMNIKEY CardMan 5x21 00 00 No: 1 OMNIKEY CardMan 5x21 00 01 $ ./mrpkey.py -r 1 CHECK mrpkey v0.1n (using RFIDIOt v0.1s) Reader: PCSC OMNIKEY CardMan 5x21 00 01 Device is a Machine Readable Document $ ./mrpkey.py -r 1 "EXnnnnnn<cBELyymmddcSyymmddc<<<<<<<<<<<<<<cc"
To fix reader number, edit RFIDIOtconfig.py
In MRZ passport number is coded with 9 chars. Belgian uses only 8 chars so some passport readers need a document number padded with char "<" ("EXnnnnnn<")
To use mrpkey under Windows you need:
python, pyscard, pyserial, pywin32, pycrypto, python imaging library
GNU Radio
GNU Radio is a collection of software that when combined with minimal hardware, allows the construction of radios where the actual waveforms transmitted and received are defined by software. What this means is that it turns the digital modulation schemes used in today's high performance wireless devices into software problems.
pwnpass
RFID tool by 3ric Johanson (get info from rfid on credit cards), presented at Shmoocon 2009
Privacy
- Social patterns at conferences: the good and the bad ;-)
- Mining social contacts with active RFID, presentation and application of the SocioPatterns project
- Attendee Tracking/Networking, a commercial Big Brother application
- See privacy-related news on the blog
- Why it's important to consider privacy when designing a RFID infrastructure: acceptance!
Misc
- ePassport
- MOBIB
- Cambio
- Cambio (at least in Germany) is using Invers COCOS-keymanager, according to this car-sharing technology overview and if RFIDjournal is right, this is a passive 125 kHz Hitag RFID inlay, manufactured by NXP Semiconductors
- US passport card
- see here for slides, video & tools
- New Forum setup by Chris Paget (aka foon)