Server Dell PowerEdge T410

From YobiWiki
Jump to navigation Jump to search

Manuals

  • here, online version of the main manual here with chapter on LED status here

Install notes

  • In BIOS
    • Activate Virtualization support
    • Power Management -> OS Control
    • Report kbd errors: NO
  • Installing squeeze (frozen but still testing) from daily image (17/08/2010)
    • Complains about missing bnx2/bnx2-mips-09-5.0.0.j3.fw & bnx2/bnx2-rv2p-09-5.0.0.j3.fw
      • Get it on another machine and put it on USB stick: aptitude install firmware-bnx2 ; cp /lib/firmware/bnx2/bnx2-*-09-5.0.0.j3.fw /media/XXXX
      • Actually I had also an additional Intel network card so I could have skipped this step...
    • Partitionning:
      there is a first primary partition for Dell Utilities (FAT16), I left it just in case...;
      there is also a second primary partition: 2Gb of FAT32, empty, so I deleted it.
      partition #2: primary 10Gb ext3 / label=ROOT
      partition #3: primary 16Gb swap
      partition #5: logical 2Tb physical volume for LVM
      Configure LVM / ok to write table / Create VG with sda5, called DATA
    • Tasksel: SSH & standard utilities
    • Reboot
  • SSH: PermitRootLogin no / ssh-copy-id ...
  • Install mc, sudo (adduser xxx sudo)
  • Renaming interfaces (always easier to remember what's plugged where...)
    • à la ifrename
      • aptitude install ifrename
      • Create /etc/iftab then reboot
intelG mac 00:1b:21:xx:xx:xx
intelD mac 00:1b:21:xx:xx:xx
bcm1   mac 84:2b:2b:xx:xx:xx
bcm2   mac 84:2b:2b:xx:xx:xx
    • à la udev
      • actually we don't need ifrename because udev is now doing the same, see /etc/udev/rules.d/70-persistent-net.rules, you can simply change the NAME key
    • Be sure the old name is not used anywhere else in your config, typically in /etc/network/interfaces
  • XEN
    • see notes on Debian wiki
    • aptitude install linux-image-2.6.32-5-xen-amd64 xen-tools xen-utils
    • backup /etc/xen/xend-config.sxp
    • edit /etc/xen/xend-config.sxp, and uncomment line "(network-script network-bridge)" or for a non-default interface ethX: "(network-script 'network-bridge netdev=ethX')"
    • reboot
    • aptitude remove --purge linux-image-2.6.32-5-amd64 linux-image-2.6-amd64
    • /etc/default/grub => GRUB_DEFAULT=2
    • update-grub
    • reboot
    • cat /proc/xen/capabilities
  1. xen-create-image --hostname my-xen1 --dhcp --dir /home/s1-xen1/