Modem BBox-2
Description
This is the default modem coming with Belgacom internet solutions in Belgium.
It allows SIP and IPTV.
It's a Sagem F@st 3464 (even if the box looks different), running a customized version of Jungo Openrg.
Version information, as visible on the web interface:
Runtime Code Version 6001GR-6000GR Hardware Version 1 Serial Num LK12345DP123456 VDSL Version Firmware-VTU-R:1.0.7r57bIK105012 Time Dec 27 2007, 18:50:21
Exploration
A number of services & ports are available:
web interface
You can reach it via any of those addresses:
HTTPS offers a OpenRG SSL certificate, to be explicitly accepted by your browser to go further...
Admin settings menu:
If you're logging as admin rather than user as default, you'll get an extra menu:
This allows to save and restore the whole configuration and to upload new firmwares, if any.
Other pages might be accessible, cf this thread (french) or this page (french)
memory sharing
Apparently you may connect a USB harddrive to the BBox-2 and share its content as with a NAS.
-> /mnt/usb internally
A webserver (lighttpd) would then expose the content via:
Or if via the admin menu, you enable memory sharing, we get the same via a WAN (accessible outside too!) https:
HTTPS offers a Sagem certificate
telnet
- telnet on 192.168.1.1 port 23 and port 8023
- telnet SSL on port 992
- login admin password BGCVDSL2
- (TODO: try user/user)
If you type the command "shell" you'll get a shell prompt and a busybox environment ;-)
[admin @ home]$ shell
BusyBox v1.01 (2009.02.19-21:18+0100) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# cat /proc/version
Linux version 2.6.15 #24 Mon Mar 2 18:21:25 CET 2009
#
# cat /proc/cpuinfo
system type : ADI Fusiv Core
processor : 0
cpu model : Lexra LX4189 V0.0
BogoMIPS : 199.47
wait instruction : no
microsecond timers : no
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : no
ASEs implemented :
VCED exceptions : not available
VCEI exceptions : not available
# ps
PID Uid VmSize Stat Command
1 0 652 S /bin/init
2 0 SWN [ksoftirqd/0]
3 0 SW< [events/0]
4 0 SW< [khelper]
5 0 SW< [kthread]
8 0 SW< [kblockd/0]
11 0 SW< [khubd]
35 0 SW [pdflush]
36 0 SW [pdflush]
38 0 SW< [aio/0]
37 0 SW [kswapd0]
559 0 SW [mtdblockd]
574 0 4436 S /bin/openrg
629 0 SWN [jffs2_gcd_mtd1]
677 0 348 S /bin/sh /etc/vdsl.sh
680 0 2208 S vdsld
686 0 560 S /bin/main_autom /etc/process_list.dat 2 9
687 0 560 S /bin/main_autom /etc/process_list.dat 2 9
688 0 560 S /bin/main_autom /etc/process_list.dat 2 9
689 0 2208 S vdsld
690 0 2208 S vdsld
691 0 2208 S vdsld
692 0 2208 S vdsld
693 0 2208 S vdsld
694 0 2208 S vdsld
695 0 2208 S vdsld
696 0 2208 S vdsld
697 0 2208 S vdsld
753 0 4436 D /bin/openrg
752 0 SW [idmaThread]
754 0 424 S hostapd /etc/hostapd.conf.eth2
757 0 764 S /bin/watchdog
758 0 560 S /bin/main_autom /etc/process_list.dat 2 9
772 0 228 S /usr/local/bin/syncloop
777 0 644 S /usr/local/sbin/lighttpd -f /mnt/ffs/A/lighttpd.conf
781 0 388 S /bin/igmpsnoop -i eth0 -l 30 -c 0x10080 -v -t
782 0 380 S /bin/oam start 5
783 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
786 0 296 S /bin/syslogd-sa -b
787 0 380 S /bin/oam start 5
788 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
789 0 380 S /bin/oam start 5
790 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
791 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
792 0 800 S /bin/tr98 5 5
795 0 1804 S /bin/tr69 --debug 5
797 0 1804 S /bin/tr69 --debug 5
798 0 1804 S /bin/tr69 --debug 5
799 0 800 S /bin/tr98 5 5
800 0 800 S /bin/tr98 5 5
801 0 1804 S /bin/tr69 --debug 5
802 0 1804 S /bin/tr69 --debug 5
803 0 800 R /bin/tr98 5 5
806 0 2424 S /bin/sipd /etc/process_list.dat 5 5
807 0 2424 S /bin/sipd /etc/process_list.dat 5 5
808 0 2424 S /bin/sipd /etc/process_list.dat 5 5
809 0 2424 S /bin/sipd /etc/process_list.dat 5 5
810 0 2424 S /bin/sipd /etc/process_list.dat 5 5
815 0 2424 S /bin/sipd /etc/process_list.dat 5 5
816 0 2424 S /bin/sipd /etc/process_list.dat 5 5
817 0 2424 S /bin/sipd /etc/process_list.dat 5 5
818 0 1804 S /bin/tr69 --debug 5
862 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
1318 0 444 S /bin/sh
1327 0 320 R ps ax
#
# df
Filesystem 1k-blocks Used Available Use% Mounted on
cramfs 2560 2560 0 100% /mnt/cramfs
# cat /etc/mtab
rootfs / rootfs rw 0 0
cramfs /mnt/cramfs cramfs_mainfs ro 0 0
/proc /proc proc rw,nodiratime 0 0
usbfs /proc/bus/usb usbfs rw 0 0
/sys /sys sysfs rw 0 0
# cat /proc/mounts
rootfs / rootfs rw 0 0
cramfs /mnt/cramfs cramfs_mainfs ro 0 0
/proc /proc proc rw,nodiratime 0 0
usbfs /proc/bus/usb usbfs rw 0 0
/dev/mtdblock1 /mnt/ffs/A jffs2 rw,sync,noatime 0 0
/sys /sys sysfs rw 0 0
I got also /mnt/ffs mounted once, should check again...
Website files are in /mnt/cramfs/home/httpd/html
Trying to change the theme (this didn't bring extra menu, to the contrary)
[admin @ home]$ rg_conf_print wbm/theme (theme(Sagem)) [admin @ home]$ rg_conf_set wbm/theme OpenRG [admin @ home]$ rg_conf_print wbm/theme (theme(OpenRG))
To revert:
[admin @ home]$ rg_conf_set wbm/theme Sagem
To learn the commands to manipulate the configuration, see here (french)
others
- 2555/tcp open unknown UPnP???
- 7020/tcp open unknown remote management rmt_mng???
- 7021/tcp open ssl ???
- 8085/tcp open unknown gSOAP_Web_Service???
accessible from WAN
- pings seem to be blocked
- 631 open?
- 2555 open?
- 7020 open?
- 7021 open?
- 8085 open?