Laptop Dell Latitude E6500
After my previous laptop being end-of-lease I got this one in May 2009.
Here is my setup experience of a Debian Squeeze.
Links
- Dell
- Official page
- Linux & E6500
- Debian Squeeze
- ISO
- Current squeeze kernel is 2.6.26-15 which is good as there was a fix for the touchpad integrated since 2.6.26-13:
Register DualPoint model found in Dell Latitude E6500 (Closes: #507958) - Debian AMD64 port
- The Debian GNU/Linux AMD64 HOW-TO
Hardware
CPU
Intel® Core™ 2 Duo P8600 (2.4GHz, 3M L2 Cache, 1066MHz)
cat /proc/cpuinfo
- vendor_id: GenuineIntel
- cpu family: 6
- model: 23
- model name: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
- stepping: 10 (800 -> 2400?)
- cache size: 3072 KB
- flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon
- bogomips: 4787.96
Misc
- BIOS version A12
- 3072Mb, 800MHz DDR2-800 SDRAM, 2 DIMMS 2048+1024
- Intel Corporation 82801I (ICH9 Family)
- HDA Intel (STAC92xx Analog)
- PCI bridge: 4 Ports PCI Express, SMBus Controller, ISA bridge: ICH9M-E LPC Interface Controller, 6 USB controllers, 2 USB2 controllers, SATA RAID Controller
- Intel Corporation Mobile 4 Series Chipset (rev 07): Memory Controller Hub, Integrated Graphics Controller
- According to the BIOS:
- video controller Intel GM45 Graphics, bios 1659, 32Mb
- audio IDT 92HD71
- SATA is in IRRT mode (Intel Rapid Restore Technology)
- Mobile Intel® Graphics Media Accelerator X4500HD
- 15.4in Wide Screen WXGA (1280x800) LED
- CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
- FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
- SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
- System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
- on USB: 0a5c:5800 Broadcom USH (Unified Security Hub)/ Contacted SmartCard
- Intel Corporation 82567LM Gigabit Network Connection (rev 03)
- Intel Corporation Wireless WiFi Link 5100
- 8X DVD+/-RW DU-8A2S
- 160GB Hard Drive Western Digital Scorpio Black WDC WD1600BJKT-7
- SATA-300 - 7200 RPM - 16 Mo
- Shock Guard, WhisperDrive, IntelliSeek, SecurePark, Free Fall Sensor
- 300 Mbytes/s (extern) / 100 Mbytes/s (intern)
Power
- 9-Cell Battery Li-ion type:KY265 11.1V 85Wh
- 2xAC adaptors: 19.5V 90W and 130W
- Docking station
Physical connectors
- left side
- USB Powershare (allows charging USB devices when system is off)
- USB/eSATA (for ext HD or E-Mod?)
- VGA
- Express slot
- SD card reader
- back
- power input
- DisplayPort Dual Mode plug hole (generates DVI/HDMI signal with a simple line-level conversion dongle)
- Ethernet plug hole
- Room for modem plug, but no modem installed
- bottom
- connector for docking station
- SIM card slot, empty, hidden behind the battery
- right side
- 2xUSB
- smartcard reader
- mic, headphone
- 1394
- wifi catcher button??
- wifi switch
- PCMCIA slot
- DVD +/-RW
not on my setup
but can be found on other E6500 setups:
- no Bluetooth
- no Cellular
- no Fingerprint reader
Drivers as loaded by a USB-bootable Ubuntu
- i915 (Intel Graphics)
- dcdbas (Dell Systems Management Base Driver)
- ricoh_mmc (Ricoh MMC Controller disabling driver)
- snd_hda_intel (Intel HDA driver)
- iwlagn, iwlcore, rfkill, led_class, mac80211, cfg80211
- wmi (ACPI-WMI Mapping Driver)
- intel_agp
- crc_t10dif
- e1000e (Intel(R) PRO/1000 Network Driver)
Installing Debian Squeeze
Intent
Let's try the Squeeze daily build for AMD64 architectures by booting on USB Sid Debian Installer
- Sid Debian Installer
- At the moment the latest daily snapshot was of 2009-05-11 for AMD64
- how to preparing the USB stick, especially the flexible way, using syslinux:
default vmlinuz append initrd=initrd.gz
We can even try the graphical version by using:
default vmlinuz append initrd=initrd.gz video=vesa:ywrap,mtrr vga=788
This needs a regular daily build of Squeeze netinst CD ISO for AMD64 to be stored on the stick, I got the 2009-05-11_22:00 snapshot.
Booting on the USB stick
The ISO file can even be in a sub-directory but it may take a bit more time to be found.
Apparently Wi-Fi interface could be used for the Netinst but it only supports WEP, no WPA, so I'll use the Ethernet option.
It expects DHCP by default, I'm not sure how you could use static IP
In case of problems you can find a console by pressing CTRL-ALT-F2/ENTER, and find back the graphical installer by pressing ALT-F5 or ALT-F6
Partitioning
As I wanted a special setup I chose the manual mode for partitioning.
Actually I first ran the guided setup with LVM and encryption but this was not what I needed.
So:
- Create part#1, 255MB, ext2, /boot
- Create part#2, 20GB, FAT32, this is in case I'll try Xen one day...
- Create part#3, 30GB, with crypto dm-crypt
- Create part#5, 80GB, not formatted
- Create part#6, 29.8GB, not formatted
dm-crypt actually installs LUKS partitions
Note that for part#5 and #6, simply choose "logical partition", it will create the extended part#4 without showing it.
Then run configure encrypted volumes visible on top of the menu and type passphrases for the encrypted partition. I kept the default aes 256 cbc-essiv:sha256
part#5 and part#6 will also be LUKS partitions but I'll do them later as I want to use XTS block chaining.
Then back to the partitioning screen, now you can configure the content of part#3: sda3_crypt will be /root, formatted as ext3 with user_xattr.
If, like me, you already configured the other encrypted partitions then want to go back and change crypto settings or deleting them, the system will refuse because they're in use. I tried to undo them properly but finally I chose to blank (with dd) the beginning of part#4 then delete part#4 with fdisk from the console to delete the whole extended partition then by going back to the main list of the Installer, and choosing again Partitioning, I could redo them.
With 3GB of RAM I chose to not setup swap (I could still do a file-based swap if needed)
Installing software
I let tasksel picking up its default bunch of packages "Desktop", "Laptop" and "Standard".
Time for a tea cup...
First boot
It boots, but even if the Debian Installer recognized our Wi-Fi adaptor, Squeeze doesn't know it.
And screen resolution is 1024x768.
(OK) Setting up Wi-Fi
See http://wiki.debian.org/iwlagn#Squeeze and http://wiki.debian.org/WiFi/HowToUse
Add a "non-free" component to /etc/apt/sources.list, for example:
# Debian Squeeze deb http://ftp.us.debian.org/debian squeeze main contrib non-free
Add the Debian Kernel Snapshots repository to /etc/apt/sources.list:
# Debian Kernel Snapshots (experimental!) deb http://kernel-archive.buildserver.net/debian-kernel sid main
Add the Debian Kernel Snapshots repository key:
# wget -q -O - http://kernel-archive.buildserver.net/key | apt-key add -
Update the list of available packages and install the firmware-iwlwifi and wireless-tools packages:
# aptitude update # aptitude install firmware-iwlwifi wireless-tools
Install a 2.6.28 (or later) kernel image appropriate for your system. For example:
# aptitude install linux-image-2.6.29-2-amd64
Note that if you have more than 3.2Gb of RAM you'd better use a bigmem kernel.
Restart your system and boot with the newly installed kernel.
Now, in Gnome, when clicking on the Network applet you can configure Wi-Fi
(OK) Suspend
Suspend-to-RAM seems to work fine, very quick restore
Can be called via the menu or by pressing FN-Moon key, wake up by pressing power button
If you setup Gnome to suspend-to-RAM when LID is closed, then it'll wake up when you open it again
As we don't have a swap partition, no suspend-to-disk!
Swapfile
aptitude install dphys-swapfile
By default it will be 2xRAM size, located at /var/swap. If you want to change it:
/etc/init.d/dphys-swapfile stop cp /usr/share/doc/dphys-swapfile/examples/dphys-swapfile.example /etc/dphys-swapfile # Edit /etc/dphys-swapfile /etc/init.d/dphys-swapfile start
Take care it's excluded from your backup strategy...
Additional encrypted partitions
As seen before, I want to use /dev/sda5 and /dev/sda6 as extra encrypted partitions according to my notes on LUKS.
dd if=/dev/urandom of=/dev/sda5 cryptsetup luksFormat -c aes-xts-plain -s 256 /dev/sda5 YES my_passphrase echo "sda5_crypt /dev/sda5 none luks" >> /etc/crypttab /etc/init.d/cryptdisks start my_passphrase mkfs.ext3 /dev/mapper/sda5_crypt echo "/dev/mapper/sda5_crypt /home2 ext3 user_xattr,errors=remount-ro 0 1" >> /etc/fstab
Note that we'll mount it first on /home2 as we're already working from /home
Idem for sda6
Transferring content
From old to new laptop, I used a cable between them. Dell laptops are able to turn a straight Ethernet cable into a cross-cable.
## source: # tar cf - /home/* |nc -l 10000
## target (in /home2): # nc -w 5 10.0.0.1 10000 |pv|tar xf -
(OK/WIP) Video
By default it loaded the generic VESA driver in a panned 1024x768 resolution.
Solution:
Add manually in /etc/X11/xorg.conf:
Section "Device" Identifier "Configured Video Device" + Driver "intel" EndSection
Ambient Light Sensor is working (even if it seems deactivated in BIOS?!)
(OK) Audio
By default works correctly with ALSA, the mixer has a lot of unknown controls...
To use the kernel OSS emulation of ALSA, by default it always takes the first ADC available which is the internal mic.
To get e.g. baudline working with the external mic, you've first to open once /dev/audio:
cat /dev/audio > /dev/null & baudline kill %cat
To get Skype working with the internal mic, see below in the applications section
Example to play the internal mic on the speakers (! Larsen)
arecord -D hw:0,0,0 -f S16_LE -c2 -r48000 | aplay -D hw:0
And with the external mic:
arecord -D hw:0,0,1 -f S16_LE -c2 -r48000 | aplay -D hw:0
(OK) HDMI
HDMI through the docking station works OOB.
I also bought a cheap DisplayPort to HDMI converter dongle on eBay and it works like a charm.
Refs: Neet 1 x DispayPort ( MALE std size 20 pin ) to HDMI ( FEMALE std size 19 pin ), 9 GBP
Simply use xrandr to activate the HDMI output. My TV resolution is 1900x1080.
To get also the sound through HDMI, use ALSA device "hdmi" or if it's not 5.1 but only stereo: "plug:hdmi"
E.g. with aplay:
$ aplay -D plug:hdmi -c 2 file.wav
With mplayer:
$ mplayer -ao alsa:device=hdmi movie.avi
or
$ mplayer -ao alsa:device=plug=hdmi movie.avi
(OK) Touchpad
To allow fine-tuning of the device and activate circular scrolling:
# aptitude install gpointing-device-settings xinput $ xinput list ... "AlpsPS/2 ALPS DualPoint TouchPad"
xinput is not needed but it's a handy tool
Note that as I had some problems to run gpointing-device-settings, I upgraded my whole Xorg setup to 7.4
# aptitude install xserver-xorg/unstable
then accept upgrade of all dependencies
(OK) SD Card Reader
Works
(OK) PC Card (PCMCIA)
Works
(WIP) Express slot
Not tested, should work.
Note from Gentoo:
- enable PCI express and hotplugging as modules (pciehp and pci_hotplug)
- load pciehp module with pciehp_force=1 parameter in order to have hotplugging functionality
(OK) USB
Works
(WIP) Firewire
Not tested, should work
(WIP) eSATA
Not tested, should work
(Partial) Smartcard reader
aptitude get install pcscd pcsc-tools
Add the reader to libccid conf file
Without fingerprint reader: VendorID=0x0a5c ProductId=0x5800 (with: 0x5801)
Edit /etc/libccid_Info.plist and add lines in ifdVendorID, ifdProductID and ifdFriendlyName arrays
Trying manually
/etc/init.d/pcscd stop pcscd -f -a -d
FAILED with IFDHCreateChannelByName() failed
Actually it may work but only if a card is present when pcscd is started.
See also here
RFID support seems not possible on Linux for now
UPDATE: since an upgrade it's even worse, only basic retrieval of ATR works
Should try a firmware upgrade? see http://www.natisbad.org/E4300/index.html
Tuning Gnome
- add to panel
- CPU frequency scaling monitor: works fine
- Deskbar (ALT-F3)
- Lock screen
- System monitor
- System->Preferences
- Keyboard->Dell Latitude series laptop
- Power management->When laptop lid is closed: Suspend
- Applications->Sound->Volume Control
- Preferences-> show PC Beep track
- Turn off PC beep (vol=0 is not enough), haaaa much better :-)
- Epiphany is the default browser, to change it:
- System->Preferences->Preferred Applications
- See also:
# update-alternatives --config x-www-browser
Additional software
Dependencies for ia32
It's possible to run natively some 32-bit code, to be prepared:
# aptitude install ia32-libs ia32-libs-gtk lib32nss-mdns
See also The Debian GNU/Linux AMD64 HOW-TO
Dell specific
# aptitude install libsmbios-bin
Flash
If you're lucky you can try
aptitude install flashplugin-nonfree
But while I'm writing these lines, Adobe didn't maintain its 64-bit version (latest was 10.0.45.3 I think while 32-bit version is 10.1.53.64).
The options are:
- Install an alternative, I tried gnash but it failed playing youtube videos, I didn't try further
- Keep the bogus & unsecure 64-bit version (reinstalling it is even not possible because flashplugin-nonfree cannot download the checksum files anymore)
- Downgrade Firefox to a 32-bit version (just for this f** flash plugin?? come on...)
- Install the 32-bit version of Adobe flash, through nspluginwrapper
This is the last option that I'll try to follow, this is also the option proposed by the Firefox add-on Flash AID, but it only works properly on Ubuntu.
But there is not yet a Debian package proposing this setup, only Ubuntu does offer it so I installed the Ubuntu package from here:
wget http://security.ubuntu.com/ubuntu/pool/multiverse/f/flashplugin-nonfree/flashplugin-installer_10.1.53.64ubuntu0.10.04.1_amd64.deb sudo dpkg -i flashplugin-installer_10.1.53.64ubuntu0.10.04.1_amd64.deb
I get an error on missing nspluginwrapper so I installed it (from debian-multimedia)
sudo aptitude install nspluginwrapper
It still fails with
nspluginwrapper: no appropriate viewer found for libflashplayer.so
We can see the source of the error by trying
sudo nspluginwrapper -v -i /usr/lib/flashplugin-installer/libflashplayer.so
Ok we're missing some libnss3 stuff, actually the 32-bit version of that library so:
sudo apt-get install ia32-libs-libnss3
So to put everything in the right order:
sudo apt-get install ia32-libs-libnss3 nspluginwrapper wget http://security.ubuntu.com/ubuntu/pool/multiverse/f/flashplugin-nonfree/flashplugin-installer_10.1.53.64ubuntu0.10.04.1_amd64.deb sudo dpkg -i flashplugin-installer_10.1.53.64ubuntu0.10.04.1_amd64.deb
Result: complete fail
It takes ages to start Firefox, it burns CPU as hell and it doesn't even work to do what it's supposed to do: playing swf movies.
So back to square one, I want to reinstall the broken 64-bit version and wait for Adobe to provide a better version.
As flashplugin-nonfree doesn't work anymore, I'm doing it by hand:
wget http://download.macromedia.com/pub/labs/flashplayer10/libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz tar zxvf libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz sudo cp libflashplayer.so /usr/lib/firefox/plugins/
Another attempt because this 64-bit version becomes really too unsecure to live with (be sure to remove all 64-bit versions of libflashplayer.so from your install):
sudo apt-get install ia32-libs-libcurl3 ia32-libs-libnspr4 ia32-libs-libidn11 ia32-libs-libssh2 ia32-libs-libnss3 # Get flash from http://get.adobe.com/fr/flashplayer/thankyou/?installer=Flash_Player_10.1_for_Linux_(.tar.gz) tar xzf install_flash_player_10_linux.tar.gz mkdir ~/.mozilla/plugins_i386/ cp libflashplayer.so ~/.mozilla/plugins_i386/ nspluginwrapper -v -i ~/.mozilla/plugins_i386/libflashplayer.so
Note that instead of getting ia32 libs from Marillat, one can try the following script: http://people.debian.org/~bartm/flashplugin-nonfree/ia32-libs-workaround-499043-squeeze.sh
UPDATE: Adobe has a preview release of FlashPlayer v10 natively 64-bit. One simply needs to replace its libflashplayer.so, e.g. in ~/.mozilla/plugins/libflashplayer.so
Misc software
# aptitude install mc etckeeper htop iotop \ dlocate reportbug-ng cruft \ sun-java6-jdk sun-java6-plugin \ flashplugin-nonfree icedove ttf-unifont \ lynx \ libio-socket-ssl-perl \ abiword vim gawk-doc \ gphoto2 hugin autopano-sift-c kflickr \ gimp-data-extras gimp-help-common gimp-help-en gimp-help-fr gimp-plugin-registry gimp-resynthesizer gimp-texturize \ pitivi \ psi libqca2-plugin-gnupg gajim \ telepathy-gabble telepathy-salut telepathy-butterfly telepathy-haze telepathy-idle telepathy-sofiasip telepathy-stream-engine \ samba smbclient smbfs wine synergy \ rar unrar unzip \ k3b \ computertemp netspeed teatime driconf \ impressive \ gcompris extremetuxracer armagetronad \ ntfsprogs # aptitude install build-essential binutils-doc \ g++-multilib g++-4.3-multilib gcc-multilib gcc-4.3-multilib gcc-4.3-locales \ gcc-doc gcc-4.3-doc glibc-doc libstdc++6-4.3-doc \ autoconf automake1.9 libtool flex bison gdb \ libstdc++6-4.3-dbg libgcc1-dbg libgomp1-dbg libmudflap0-dbg \ manpages-dev libmudflap0-4.3-dev \ git-doc git-svn git-cvs gitk git-gui kdiff3 \ libqt4-dev libreadline5-dev
# aptitude install dash # dpkg-reconfigure dash
Compiz:
aptitude install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra gconftool-2 --set /apps/compiz/general/allscreens/options/active_plugins \ --type list --list-type string \ '[gconf,png,svg,decoration,wobbly,fade,minimize,cube,rotate,zoom,scale,move,place,switcher,screenshot,resize]' ccsm
Virtualbox
Because we've chosen a 2.6.29 kernel we'll need to build the virtualbox module ourselves, with kbuild package from Sid, so first let's add Sid feeds:
Add to /etc/apt/sources.list
deb http://ftp.be.debian.org/debian/ sid main contrib non-free deb-src http://ftp.be.debian.org/debian/ sid main contrib non-free
And make sure "testing" will remain our default distro:
echo 'APT::Default-Release "testing";' > /etc/apt/apt.conf.d/00default
Now we can do our job:
aptitude install module-assistant linux-kbuild-2.6.29 module-assistant prepare module-assistant auto-install virtualbox-ose aptitude install virtualbox-ose
Notes on using the commercial version of VirtualBox:
- one single package covers all
- remove all OSE-related packages prior install, including guest additions
- exec is called VirtualBox instead of virtualbox for the OSE version
- to recompile the driver for a new kernel: (if it fails check /var/log/vbox-install.log you probably forgot the kernel headers)
/etc/init.d/vboxdrv setup
Multimedia
From Marillat, add this to /etc/apt/sources.list:
deb http://www.debian-multimedia.org/ testing main deb-src http://www.debian-multimedia.org/ testing main
# aptitude update # aptitude install debian-multimedia-keyring # aptitude dist-upgrade # aptitude install acroread acroread-plugins acroread-dictionary-en acroread-l10n-en \ 2mandvd dvdrip gtkpod-aac k9copy lame w64codecs libdvdcss2
To still have evince as the default pdf reader:
echo "evince: */*" >> /etc/mailcap.order update-mime
Skype
2.0.0.72
# aptitude install libqt4-gui
Get the Etch package at http://www.skype.com/go/getskype-linux-deb
# dpkg -i --force-architecture skype-debian_2.0.0.72-1_i386.deb
I had some troubles to get the internal mic working, add to ~/.asoundrc :
pcm.intmic { type hw card 0 device 0 subdevice 0 }
And in Skype select "intmic" as input
For the external mic, it's subdevice 1
2.1.0.47 (beta)
Because of the architecture mismatch, apt doesn't know about those i386 skype packages so we've to use dpkg when we want to remove them
# dpkg -r skype # dpkg -i --force-architecture skype-debian_2.1.0.47-1_i386.deb
Well actually you may try the Ubuntu 64bit package but actually it's just the same 32bit binary... Apparently there is still a little problem when executing skype:
$ skype (<unknown>:7008): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
This can be solved by calling skype like this:
$ GTK_PATH=/usr/lib32/gtk-2.0 skype
Then I got a crash whenever I tried to call or chat, to solve it, see here:
- maybe deinstall pulseaudio
- remove /usr/lib32/libpulse*
- execute ldconfig
Google Earth
# aptitude install googleearth-package $ make-googleearth-package # dpkg -i googleearth_5.0.11733.9347+0.5.6-1_amd64.deb
Google Gears
Is not officially distributed for 64-bit but some folks did the job for you.
See here
Some precompiled xpi are available here
# aptitude install openssh-server openvpn network-manager-openvpn-gnome resolvconf pwsafe kgpg
# aptitude install encfs # adduser toto fuse
You may want to activate sudo support for your user
# adduser toto sudo
and if you want to skip password, uncomment last line of /etc/sudoers with
# visudo
Recompiling pcscd with libusb support for external RFID reader Omnikey 5321: see here
TODO
- video: 3D modes etc, dual screen etc 1
- video: prob when going back to console, try fb?
- restore other encrypted partitions See also my old LUKS notes
- WPA roaming ok? check EAP
- IA32 chroot
- compare with old setup list of packages and list of non-system files
- check all hardware support
- compare loaded drivers with Ubuntu list
- USB Powershare to be activated in BIOS
- Intel Virtualization Technology to be activated in BIOS
- TPM disabled in BIOS, anything interesting there?
- dcdbas & libsmbios
- sensors?
- Bradcom USH (BCM5880) RFID & HID Global iCLASS ?? 1
- Wifi catcher button?
- DCP key?
- DisplayPort
- LUKS preload keys
- merge bashrc
- check backuppc
- microphone?