IDream ID-SMID01 SmartCard reader

From YobiWiki
Jump to navigation Jump to search

10€ at Carrefour 

lsusb
Bus 003 Device 004: ID 062d:0001 Taiwan Tai-Hao Enterprises Co., Ltd

I tried to install openct and opensc, there was communication with the reader with the standard CCID, I can get communication with a VISA card but with the Belgian eID I get error at protocol selection and the beidgui was not working neither. 

apt-get install beidgui
=> libopenct1 libpcsclite1 libbeidlibopensc2 libbeid2 beid-tools beidgui libccid pcscd 

# openct-tool atr                                                                      
Detected CCID Compatible                                                             
Card present, status changed                                                         
ATR: 3b 98 13 40 0a a5 03 01 01 01 ad 13 11                                          
Jan  8 01:09:28 mercure ifdhandler[1045]: CCID Compatible: Bad PTS response          
Jan  8 01:09:28 mercure ifdhandler[1045]: Protocol selection failed

VISA card replies correct ATR & protocol selection: 

# cardos-info                                                                        
3b:67:00:00:00:00:00:00:00:90:00                                                     
Received (SW1=0x6D, SW2=0x00)

I could finally get it working, not with openct which gave the broken results as shown above but with libccid:
Edit /etc/libccid_Info.plist and add the vendor/product ID to the list, e.g.: 

--- libccid_Info.plist.old      2008-02-04 23:54:26.000000000 +0100
+++ libccid_Info.plist  2008-02-04 23:55:23.000000000 +0100
@@ -180,6 +180,7 @@
               <string>0x09C3</string>
               <string>0x0783</string>
               <string>0x0C4B</string>
+               <string>0x062D</string>
       </array>

       <key>ifdProductID</key>
@@ -268,6 +269,7 @@
               <string>0x0008</string>
               <string>0x0003</string>
               <string>0x0300</string>
+               <string>0x0001</string>
       </array>

       <key>ifdFriendlyName</key>
@@ -356,6 +358,7 @@
               <string>ActivCard USB Reader 2.0</string>
               <string>C3PO LTC31</string>
               <string>Reiner-SCT cyberJack pinpad(a)</string>
+               <string>iDream ID-SMID01</string>
       </array>

       <key>Copyright</key>

Now a simple call to beidgui works :-)
Check Belgian eID for other experiments with the eID card under Linux.

Avoid openct to try to open the reader: edit /etc/udev/rules.d/z60_openct.rules and comment out: 

# ccid
#ENV{MODALIAS}=="usb:*ic0Bisc00*", RUN+="/lib/udev/openct_usb"

Note that I've still many messages in /var/log/messages like: 

pcscd: ifdhandler.c:948:IFDHTransmitToICC() lun: 0
last message repeated 5 times
pcscd: ifdhandler.c:948:IFDHTransmitToICC() lun: 0
last message repeated 7 times
...

I could get rid of those by lowering the level of verbosity in /etc/init.d/pcscd by adding this line near DAEMON=pcscd, I'm a bit surprised such option cannot be given in /etc/reader.conf: 

DAEMON_ARGS="--error"

Still one issue: everything works up to the moment I remove and reinsert the card, after that, no way, always errors such as: 

pcscd: eventhandler.c:316:EHStatusHandlerThread() Error communicating to: iDream ID-SMID01 00 00
commands.c:938:CmdGetSlotStatus Hardware error
ifdwrapper.c:494:IFDStatusICC() Card not transacted: 612
Retrieved from "https://wiki.yobi.be/index.php?title=IDream_ID-SMID01_SmartCard_reader&oldid=2548"