Revision as of 00:26, 6 March 2015

my personal notes about USB armory

Hardware

Set manual ip to usb0: 10.0.0.2, no routing, no DNS, via NotworkManager or:

/sbin/ip link set usb0 up
/sbin/ip addr add 10.0.0.2/24 dev usb0

Give connectivity to USB armory

/sbin/iptables -t nat -A POSTROUTING -s 10.0.0.1/32 -o wlan0 -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward

Connect

ssh usbarmory@10.0.0.1 # pwd usbarmory

Quick setup time (in case ntpdate couldn't catch up at boot)

ssh usbarmory sudo date --set $(date +@%s)

Free the LED

ssh usbarmory@10.0.0.1 sudo sed -i '/^ledtrig_heartbeat/d' /etc/modules

On the device on can turn the LED on with

echo 0 > /sys/class/leds/LED/brightness

and off with

echo 1 > /sys/class/leds/LED/brightness

A bit strange, I would expect 0 for off till max_brightness=255

Quick backup of the most important things (~9Mb)

ssh -n usbarmory@10.0.0.1 'sudo tar -cpf - /etc /root /home /var' |gzip > backup-$(date "+%Y%m%d-%H%M%S").tgz

Explore image

mkdir mnt
sudo mount -o loop,offset=0x500000,ro usbarmory-debian_wheezy-base_image-20150302.raw mnt

@@ Line 34: / Line 34: @@
 Free the LED
  ssh usbarmory@10.0.0.1 sudo sed -i '/^ledtrig_heartbeat/d' /etc/modules
+On the device on can turn the LED on with
+ echo 0 > /sys/class/leds/LED/brightness
+and off with
+ echo 1 > /sys/class/leds/LED/brightness
+A bit strange, I would expect 0 for off till max_brightness=255
 Quick backup of the most important things (~9Mb)