Difference between revisions of "Logic Sniffer"

Revision as of 14:36, 24 November 2010

Description

I'm talking about this beast

Installation

My udev rules

I added a /dev/OpenLogicSniffer symlink by following this page:

#File /etc/udev/rules.d/77-ols.rules
#Rules for Openbench Logix Snifferslogic. Creates a nice link to the ols
ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fc92" MODE="0666" SYMLINK+="OpenLogicSniffer"

If you've problems with modem-manager trying to access the device (as seen in /var/log/syslog), you can add the following rule:

ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fc92" ENV{ID_MM_DEVICE_IGNORE}="1"

Firmware upgrade

Software

I tried this fork: http://www.lxtreme.nl/ols/ which is the official client for this board
and changed a bit the run.sh script to handle it through symlink :

if [ -h $0 ]; then
    DIR=$(dirname "$(readlink $0)")
    cd "$DIR"
    BASEDIR=.
else
    BASEDIR=$(dirname -- "${0}")
fi

Make sure that the Device is set to "OpenBench Logic Sniffer".
Click the capture button and type in your OLS port path in the "Analyzer port" field (i.e. /dev/OpenLogicSniffer if you installed it as I did). Leave the other settings at their default value for now and click "Capture".

@@ Line 26: / Line 26: @@
 fi
 </source>
+* Make sure that the Device is set to "OpenBench Logic Sniffer".
+* Click the capture button and type in your OLS port path in the "Analyzer port" field (i.e. /dev/OpenLogicSniffer if you installed it as I did). Leave the other settings at their default value for now and click "Capture".