Difference between revisions of "Hantek DSO-1060"
m |
m (→Under Linux) |
||
| Line 23: | Line 23: | ||
<br>Upgrade to v1.70 didn't improve the situation |
<br>Upgrade to v1.70 didn't improve the situation |
||
==Under Linux== |
==Under Linux== |
||
| + | Opensource projects of interest: |
||
| + | * http://sourceforge.net/projects/hantekdso/ |
||
| + | * http://sourceforge.net/projects/openhantek/ |
||
| + | * http://sourceforge.net/projects/oscope2100/ |
||
Revision as of 11:12, 14 August 2010
Description
Chinese handheld scopemeter, 2 inputs 60MHz & DMM 6000 pts
Bought on this French e-shop
Internal data:
- Module DSO1060
- Serial No. DSO0000855
- Firmware Version: 1.68
- Hardware version: 5.2.34.0.0
USB memory stick
The device is USB-host capable but I had many troubles to get him accessing properly a memory stick.
On a 6Gb harddrive it hung when I tried to write a file, and on a 256Mb flash it was always claiming "Unknown Filesystem".
I finally managed to get it working by reformatting the 256Mb flash as FAT32 (FAT16 failed, or was it FAT12?)
Firmware upgrade
Once you have a working USB stick you can try upgrading the firmware.
I found the firmware version 1.70 here, follow simply the included pdf (the Chinese version is here).
If there is a newer version it should come via the same link I guess...
Issues
A known issue is in continuity test mode, it's rather slow to beep, which makes it much less usable than a cheap continuity tester...
Upgrade to v1.70 didn't improve the situation
Under Linux
Opensource projects of interest: