Difference between revisions of "Modem BBox-2"
Jump to navigation
Jump to search
m (→web interface) |
m (→web interface) |
||
| Line 69: | Line 69: | ||
** 1040 connection wizard |
** 1040 connection wizard |
||
** 1280 RADIUS |
** 1280 RADIUS |
||
| + | ** 1450 IPv6 |
||
Usage: log first as admin as explained before, then enter the pseudo-URL |
Usage: log first as admin as explained before, then enter the pseudo-URL |
||
Revision as of 15:06, 3 February 2010
Description
This is the default modem coming with Belgacom internet solutions in Belgium.
It allows SIP and IPTV.
It's a Sagem F@st 3464 (even if the box looks different), running a customized version of Jungo Openrg.
Version information, as visible on the web interface:
Runtime Code Version 6001GR-6000GR Hardware Version 1 Serial Num LK12345DP123456 VDSL Version Firmware-VTU-R:1.0.7r57bIK105012 Time Dec 27 2007, 18:50:21
VDSL sync:
Downstream line rate 21648 kbps Upstream line rate 2848 kbps Downstream Training Margin 19.1 dB
test Speedtest.nl:
Downstream line rate 11Mbps Upstream line rate 1Mbps
Exploration
A number of services & ports are available:
web interface
You can reach it via any of those addresses:
HTTPS offers a OpenRG SSL certificate, to be explicitly accepted by your browser to go further...
Admin settings menu:
If you're logging as admin rather than user as default, you'll get an extra menu:
This allows to save and restore the whole configuration and to upload new firmwares, if any.
Once you get a dump of the configuration you can try manipulating it, there is a guide here(pdf) or here(pdf)
Other pages might be accessible, cf this thread (french) or this page (french) for the LiveBox.
For the BBox2, here is a list of pages which work properly, inspired from here
- 730 advanced control panel
- 40 about openrg
- 70 configuration file
- 140 restart
- 150 restore defaults
- 1220 diagnostics
- 1210 mac cloning
- 120 system settings
- 900 Universal Plug and Play
- 1410 scheduler rules
- 110 date and time
- 100 users
- 810 route (same as from user menu)
- 1430 network objects
- 9035 dynamic DNS
- 9030 IP address distribution
- 9027 DNS server
- 9008 remote administration
- 9024 protocols
- logs
- 750 system (uptime)
- 752 connections
- 753 traffic
- 754 system logs
- others
- 50 network map
- 60 network list view
- 910 SNMP
- 1040 connection wizard
- 1280 RADIUS
- 1450 IPv6
Usage: log first as admin as explained before, then enter the pseudo-URL
javascript:mimic_button('goto: **..')
where ** represents the page number.
About page (#40):
- About OpenRG
- Version: 4.0.21.3.3.1.32.1.1.1.6.Fast3464.60.00.GR
- Release Date: Mar 2 2009
- Platform: Sagem F@ST346X
- Tag: NRC_belgacom-multimode-fast346x_openrg_orig_3-3-1-32-1-1-1-6_4-2-1_0-0-88
- Compilation Flags: CONFIG_SAGEM_PPPOE_PASSTHRU=y CONFIG_BELGACOM_BBOX=y CONFIG_BELGACOM=y CONFIG_AUTOSENSING_PAGE=y CONFIG_HW_USB_HOST_OHCI=y CONFIG_HW_USB_HOST_EHCI=y CONFIG_USB_PRINTER=y CONFIG_HW_USB_STORAGE=y CONFIG_USB=y CONFIG_RG_FW_CONN_PRIO=y CONFIG_RG_WATCHDOG_OPENRG=y CONFIG_SAGEM_WIFI_MODE_11N=y CONFIG_LIVEBOX_VOIP=y CONFIG_CSS_STANDARD=y CONFIG_SAGEM_MANAGE_CONFIG=y CONFIG_GUI_STANDARD=y CONFIG_GUI_LIVEBOX1=y CONFIG_SAGEM_CONSOLE_BAUDRATE=57600 CONFIG_MRA_SEC_SIZE=0x120000 CONFIG_JFFS2_FS_SIZE=0x100000 CONFIG_BOOTLDR_UBOOT_SECURE=y CONFIG_SOUCHE_RECONF=y CONFIG_SOUCHE_TR69=y CONFIG_SOUCHE_START_AUTOMATE=y CONFIG_SOUCHE_USE_EXTERNAL_OPENSSL=y CONFIG_DHCPS_VS=y CONFIG_DHCPS_FORCE_SEND_NTP=y CONFIG_DHCPS_NTP=y CONFIG_DHCPS_ROOT_PATH=y CONFIG_DHCPS_DOMAIN_NAME=y CONFIG_DHCPS_DNS=y CONFIG_DHCPS_SUBNET_MASK=y CONFIG_DHCPS_MULTIRANGE_BYDEVICEGROUP=y CONFIG_BOOTLDR_UBOOT_COMP=gzip CONFIG_FLASH_SIZE=16 CONFIG_SDRAM_SIZE=64 DIST=SAGEM_346X LIC=../jpkg_fast3202.lic
- Hardware Version: 1
- Hardware Serial Number: LK09194DP270257
- Supported Features: NetFilter Linux Firewall, Ethernet over ATM (RFC2684), Classical IP, PVC Scan, WBM Evaluation License Agreement, Internet Protocol Security, PPTP Server, PPP Over ATM, PPP Over Ethernet, PPTP Client, L2TP Client, ICMP ALG, Port trigger (TFTP) ALG, FTP/FTPS ALG, QuickTime/RealAudio/RealPlayer (RTSP) ALG, H323 ALG (Netmeeting, CuSeeMe ...), SIP ALG, MGCP ALG, PPTP Client (multiuser) ALG, Microsoft Network Messenger/Windows Messenger ALG, IPSec (multiuser) ALG, L2TP ALG, AOL Instant Messenger ALG, DNS ALG, DHCP ALG, Bridge, VLAN 802.1Q bridge, VLAN 802.1Q interfaces management, PPPoE Relay, GDB Server, IGMP Proxy, Jungo Firewall, NAT, Secure HTTP (SSL), Permanent Storage, RIP V1/V2, Reverse NAT, SNMP v1/v2, SNMP v3, Universal Plug & Play, DNS, Concurrent DNS query, DNS Router. Add route rules according to which dns server answare queries, Domain routing. Route according to domains listed on a device, Dynamic DNS, Email Notification, HTTP Proxy, Generic Proxy, Mail filter, URL Keyword Filtering, SurfControl, DHCP Server, DHCP Client, DHCP Relay Agent, Static HTML Management, Web Based Management, TimeZone support, HTTP Server, Telnet Server, SysLog, Command Line Interface, TOD Client, USB RNDIS, File Server, Posix Access Control Lists (ACLs), RAID, OAM F4/F5 Loopback, Print Server, Internet Printing, Voice Over IP, SIP Signalling, H.323 Signalling, MGCP Signalling, Remote Update Management, Remote Management Server, Event Logging, WINS Server, FTP Server, Mail Server, Web Server, File System Backup and Restore, OpenRG QOS support, Bluetooth support
memory sharing
Apparently you may connect a USB harddrive to the BBox-2 and share its content as with a NAS.
-> /mnt/usb internally
A webserver (lighttpd) would then expose the content via:
Or if via the admin menu, you enable memory sharing, we get the same via a WAN (accessible outside too!) https:
HTTPS offers a Sagem certificate
telnet
- telnet on 192.168.1.1 port 23 and port 8023
- telnet SSL on port 992
- login admin password BGCVDSL2
- (TODO: try user/user)
If you type the command "shell" you'll get a shell prompt and a busybox environment ;-)
[admin @ home]$ ver
Version: 4.0.21.3.3.1.32.1.1.1.6.Fast3464.60.00.GR
Platform: Sagem F@ST346X
Compilation Time: 02-Mar-09 17:18:02
[admin @ home]$ shell
BusyBox v1.01 (2009.02.19-21:18+0100) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# cat /proc/version
Linux version 2.6.15 #24 Mon Mar 2 18:21:25 CET 2009
#
# cat /proc/cpuinfo
system type : ADI Fusiv Core
processor : 0
cpu model : Lexra LX4189 V0.0
BogoMIPS : 199.47
wait instruction : no
microsecond timers : no
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : no
ASEs implemented :
VCED exceptions : not available
VCEI exceptions : not available
# ps
PID Uid VmSize Stat Command
1 0 652 S /bin/init
2 0 SWN [ksoftirqd/0]
3 0 SW< [events/0]
4 0 SW< [khelper]
5 0 SW< [kthread]
8 0 SW< [kblockd/0]
11 0 SW< [khubd]
35 0 SW [pdflush]
36 0 SW [pdflush]
38 0 SW< [aio/0]
37 0 SW [kswapd0]
559 0 SW [mtdblockd]
574 0 4436 S /bin/openrg
629 0 SWN [jffs2_gcd_mtd1]
677 0 348 S /bin/sh /etc/vdsl.sh
680 0 2208 S vdsld
686 0 560 S /bin/main_autom /etc/process_list.dat 2 9
687 0 560 S /bin/main_autom /etc/process_list.dat 2 9
688 0 560 S /bin/main_autom /etc/process_list.dat 2 9
689 0 2208 S vdsld
690 0 2208 S vdsld
691 0 2208 S vdsld
692 0 2208 S vdsld
693 0 2208 S vdsld
694 0 2208 S vdsld
695 0 2208 S vdsld
696 0 2208 S vdsld
697 0 2208 S vdsld
753 0 4436 D /bin/openrg
752 0 SW [idmaThread]
754 0 424 S hostapd /etc/hostapd.conf.eth2
757 0 764 S /bin/watchdog
758 0 560 S /bin/main_autom /etc/process_list.dat 2 9
772 0 228 S /usr/local/bin/syncloop
777 0 644 S /usr/local/sbin/lighttpd -f /mnt/ffs/A/lighttpd.conf
781 0 388 S /bin/igmpsnoop -i eth0 -l 30 -c 0x10080 -v -t
782 0 380 S /bin/oam start 5
783 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
786 0 296 S /bin/syslogd-sa -b
787 0 380 S /bin/oam start 5
788 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
789 0 380 S /bin/oam start 5
790 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
791 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
792 0 800 S /bin/tr98 5 5
795 0 1804 S /bin/tr69 --debug 5
797 0 1804 S /bin/tr69 --debug 5
798 0 1804 S /bin/tr69 --debug 5
799 0 800 S /bin/tr98 5 5
800 0 800 S /bin/tr98 5 5
801 0 1804 S /bin/tr69 --debug 5
802 0 1804 S /bin/tr69 --debug 5
803 0 800 R /bin/tr98 5 5
806 0 2424 S /bin/sipd /etc/process_list.dat 5 5
807 0 2424 S /bin/sipd /etc/process_list.dat 5 5
808 0 2424 S /bin/sipd /etc/process_list.dat 5 5
809 0 2424 S /bin/sipd /etc/process_list.dat 5 5
810 0 2424 S /bin/sipd /etc/process_list.dat 5 5
815 0 2424 S /bin/sipd /etc/process_list.dat 5 5
816 0 2424 S /bin/sipd /etc/process_list.dat 5 5
817 0 2424 S /bin/sipd /etc/process_list.dat 5 5
818 0 1804 S /bin/tr69 --debug 5
862 0 688 S /bin/prod_autom /etc/process_list.dat 5 5
1318 0 444 S /bin/sh
1327 0 320 R ps ax
#
# df
Filesystem 1k-blocks Used Available Use% Mounted on
cramfs 2560 2560 0 100% /mnt/cramfs
# cat /etc/mtab
rootfs / rootfs rw 0 0
cramfs /mnt/cramfs cramfs_mainfs ro 0 0
/proc /proc proc rw,nodiratime 0 0
usbfs /proc/bus/usb usbfs rw 0 0
/sys /sys sysfs rw 0 0
# cat /proc/mounts
rootfs / rootfs rw 0 0
cramfs /mnt/cramfs cramfs_mainfs ro 0 0
/proc /proc proc rw,nodiratime 0 0
usbfs /proc/bus/usb usbfs rw 0 0
/dev/mtdblock1 /mnt/ffs/A jffs2 rw,sync,noatime 0 0
/sys /sys sysfs rw 0 0
I got also /mnt/ffs mounted once, should check again...
Website files are in /mnt/cramfs/home/httpd/html
Trying to change the theme (this didn't bring extra menu, to the contrary)
[admin @ home]$ rg_conf_print wbm/theme (theme(Sagem)) [admin @ home]$ rg_conf_set wbm/theme OpenRG [admin @ home]$ rg_conf_print wbm/theme (theme(OpenRG))
To revert:
[admin @ home]$ rg_conf_set wbm/theme Sagem
To learn the commands to manipulate the configuration, see here (french)
others
- 2555/tcp open UPnP Internet Gateway Device implementing some serious commands such as GetPassword ...
- 7020/tcp open Apparently for Incoming Jnet (Jungo.net) requests for Remote Upgrade Server (see here
- 7021/tcp open Same, in SSL
- 8085/tcp open unknown gSOAP_Web_Service???
The modem is also running a TR-069 process:
- TR-069 TR-069 is a WAN management protocol intended for communication between Customer Premise Equipment (CPE) and an Auto-Configuration Server (ACS). It defines a mechanism that encompasses secure auto configuration of a CPE, and also incorporates other CPE management functions into a common framework.
- it's supposed to poll an ACS server on port 7547
and a TR-098 process, referring to the Internet Gateway Device data model
accessible from WAN
- pings seem to be blocked
- TCP port 631 (if ?)
- TCP port 2555 (openrg)
- TCP port 7020 (openrg)
- TCP port 7021 (openrg)
- TCP port 8085 (tr69)
- TCP port 8888 (lighttpd)
- UDP port 1024 (openrg)
- UDP port 1025 (hostapd)
- UDP port 3000 (openrg, vdsld...)
- RAW port 2 (openrg)
ss
Easier to get direct;y the info from the box: there is no netstat but ss does the job:
# #TCP
# ss -lnp
Recv-Q Send-Q Local Address:Port Peer Address:Port
0 0 217.136.xx.xx:992 *:* users:(("openrg",574,47),("openrg",753,47))
0 0 10.179.xx.xx:992 *:* users:(("openrg",574,34),("openrg",753,34))
0 0 192.168.1.1:992 *:* users:(("openrg",574,20),("openrg",753,20))
0 0 127.0.0.1:7019 *:* users:(("openrg",574,9),("openrg",753,9))
0 0 217.136.xx.xx:7020 *:* users:(("openrg",574,49),("openrg",753,49))
0 0 10.179.xx.xx:7020 *:* users:(("openrg",574,36),("openrg",753,36))
0 0 192.168.1.1:7020 *:* users:(("openrg",574,22),("openrg",753,22))
0 0 217.136.xx.xx:7021 *:* users:(("openrg",574,48),("openrg",753,48))
0 0 10.179.xx.xx:7021 *:* users:(("openrg",574,35),("openrg",753,35))
0 0 192.168.1.1:7021 *:* users:(("openrg",574,21),("openrg",753,21))
0 0 217.136.xx.xx:8080 *:* users:(("openrg",574,61),("openrg",753,61))
0 0 217.136.xx.xx:80 *:* users:(("openrg",574,50),("openrg",753,50))
0 0 10.179.xx.xx:8080 *:* users:(("openrg",574,38),("openrg",753,38))
0 0 10.179.xx.xx:80 *:* users:(("openrg",574,37),("openrg",753,37))
0 0 192.168.1.1:8080 *:* users:(("openrg",574,26),("openrg",753,26))
0 0 192.168.1.1:80 *:* users:(("openrg",574,25),("openrg",753,25))
0 0 *:8085 *:* users:(("tr69",790,9),("tr69",794,9),("tr69",795,9),("tr69",798,9),("tr69",799,9),("tr69",817,9))
0 0 217.136.xx.xx:8023 *:* users:(("openrg",574,45),("openrg",753,45))
0 0 217.136.xx.xx:23 *:* users:(("openrg",574,44),("openrg",753,44))
0 0 10.179.xx.xx:8023 *:* users:(("openrg",574,33),("openrg",753,33))
0 0 10.179.xx.xx:23 *:* users:(("openrg",574,32),("openrg",753,32))
0 0 192.168.1.1:8023 *:* users:(("openrg",574,19),("openrg",753,19))
0 0 192.168.1.1:23 *:* users:(("openrg",574,18),("openrg",753,18))
0 0 *:8888 *:* users:(("lighttpd",774,6))
0 0 127.0.0.1:7000 *:* users:(("openrg",574,6),("vdsl.sh",677,6),("vdsld",680,6),("vdsld",689,6),("vdsld",690,6),("vdsld",691,6),("vdsld",692,6),("vdsld",693,6),("vdsld",694,6),("vdsld",695,6),("vdsld",696,6),("vdsld",697,6),("openrg",753,6))
0 0 217.136.xx.xx:8443 *:* users:(("openrg",574,66),("openrg",753,66))
# #UDP
# ss -naup
State Recv-Q Send-Q Local Address:Port Peer Address:Port
UNCONN 0 0 *:1024 *:* users:(("openrg",574,8),("openrg",753,8))
UNCONN 0 0 *:1025 *:* users:(("hostapd",754,6))
UNCONN 0 0 192.168.1.1:53 *:* users:(("openrg",574,17),("openrg",753,17))
UNCONN 0 0 127.0.0.1:53 *:* users:(("openrg",574,7),("openrg",753,7))
UNCONN 0 0 *:3000 *:* users:(("openrg",574,5),("vdsl.sh",677,5),("vdsld",680,5),("vdsld",689,5),("vdsld",690,5),("vdsld",691,5),("vdsld",692,5),("vdsld",693,5),("vdsld",694,5),("vdsld",695,5),("vdsld",696,5),("vdsld",697,5),("openrg",753,5))
UNCONN 0 0 10.179.xx.xx:5060 *:* users:(("sipd",803,14),("sipd",804,14),("sipd",805,14),("sipd",806,14),("sipd",807,14),("sipd",812,14),("sipd",813,14),("sipd",814,14))
UNCONN 0 0 192.168.1.1:1900 *:* users:(("openrg",574,24),("openrg",753,24))
UNCONN 0 0 239.255.255.250:1900 *:* users:(("openrg",574,23),("openrg",753,23))
# #RAW
# ss -nawp
State Recv-Q Send-Q Local Address:Port Peer Address:Port
UNCONN 0 0 *:2 *:* users:(("openrg",574,15),("openrg",753,15))
UPnP
By default the modem has a UPnP IGD profile and I don't see how to disable it.
EDIT: actually it's possible by logging first as admin then entering the pseudo-URL "javascript:mimic_button('goto: 900..')"
If you use Skype this means Skype will tell the modem to open some ports and Skype will be reachable directly from Internet which means you become a relay-node and this can generate a lot of traffic!
One way to avoid it is to locally block the UPnP discovery multicast packets of Skype, e.g.:
iptables -A OUTPUT -d 239.255.255.250 -p udp -m string --algo bm --string "urn:schemas-upnp-org:service:WAN" -j DROP
By filtering on that string this allows other applications to send their M-SEARCH packet if they don't look for services:WANIP/WANPPP...
One can install that netfilter rule on Debian by following this howto
If you are using Windows, you can disable UPnP directly in Skype from version 4.0