Difference between revisions of "Laptop AMILO Pi 2550"

Revision as of 20:15, 14 February 2009

Hardware & support under Ubuntu 8.10

Chipset: Intel® 965PM+ICH8-M	OK
Intel® Core™ 2 Duo processor T8100 (2.1 GHz, 800 MHz, 3 MB L2 cache)	OK
2x1 GB DDR2 (667 MHz) module (Intel® Turbo memory?)	OK
HDD (SATA / 5400 rpm): 320 GB SATA hard disk	OK
ATI Mobility Radeon™ HD 2400 with 256 MB (DDR2) dedicated video RAM	OK, with 3D
1x DVI-D, 1x VGA 15.4” TFT LCD WXGA display with BrilliantView technology Resolution (physic.) 1280 x 800 Brightness (typ.) up to 180 cd/m² Contrast (typ.) up to 300:1
ACPI S1, S3, S4, S5	Suspend-to-RAM: OK Suspend-to-disk: not tested
3x USB 2.0 ports	OK
CIR	not tested
webcam Chicony - CNF6133 1.3 Mpixel, auto focus, automatic brightness adjustment	OK
Intel HDA Realtek ALC883	OK Support of HD audio for S/PDIF output with up to 7.1 channels 2 built-in speakers (2 x 2 W) 2 built-in array microphones
DVD drive burner with Dual Double Layer support	Write not tested
Read speed: CD-ROM 24x, DVD-ROM 8x Write speed: CD-R 24x, CD-RW 16x, DVD+R 8x, DVD-R 8x, DVD+RW 8x, DVD-RW 6x, DVD+R DL (8.5 GB) 4x, DVD-R DL (8.5 GB) 4x, DVD-RAM 5x
Intel® PRO/Wireless 3945 ABG	OK
ExpressCard slot (34/54 mm)
Realtek RTL8101E PCI Express 10/100 Mbps LAN	not tested
Castlenet (Motorola) ML3054 Built-in 56 K, V.92 fax modem	not tested
4-in-1 card reader SD/MS/MMC/MMCPRO	not tested
Li-Ion battery, 6 cells: 10.8 V / 4400 mAh
Windows Vista® Home Premium

Links

Setup

The goal is to keep Vista and install Ubuntu Intrepid 8.10 as dual-boot

Backup

The laptop comes with a Vista not yet really installed, there are 3 partitions that don't fill the entire HD.
I booted on a FCCU v12 liveCD and used partimage to backup the extended MBR (2048x512), sda1, sda2 and sda4 to an external USB drive.

Vista "install"

As the first boot of Vista will change the partitioning of the HD we've to run it now before installing Ubuntu
=> boot on Vista, take one, two, three coffees
Reboot on Fudjitsu-Siemens backup utilities (F8 -> Recover) and burn 3 DVD+R disks, beware that apparently you can only burn them once.

Ubunbu install

I mainly followed this tutorial (fr)
After Vista install, sda1 contains recovery tools as before, sda2 is about 100Gb and contains Vista, sda4 is free and about 200Gb, that's the one we will use for Ubuntu so no need to repartition anything,
Reboot on FCCU v12
Change type of sda4 -> linux (83)
Format it (128 because grub cannot start from 256 partition)

mkfs.ext3 -I 128 /dev/sda4

Reboot on ubuntu CD
Switch to a console to save the new mbr to e.g. a USB stick (I could have done it under FCCU):
ctrl-alt-f2 -> sudo dd if=/dev/sda of=/mnt/usbkey bs=512 count=2048
In gpart, choose manual -> sda4 in ext3, NO FORMAT, mount as /
Continue until "ready to install"
-> advanced -> install bootloader on sda4

MBR setup

Grub is on sda4 so we left the Vista MBR on sda, now we'll configure it with EasyBCD
Download EasyBCD and copy it to a USB stick
Reboot on Vista
Install EasyBCD -> add entry linux grub Partition2 -> add -> save (leave "grub isn't installed" disabled)
In "change settings", choose to boot ubuntu by default

Ubuntu tweaking

freeze at boot & often in console: hpet=disable http://my.opera.com/PiklesOnFire/blog/index.dml/tag/hpet=disable

webcam: OOB (enable with FN-F7)

Acrobat: http://www.lostinbrittany.org/blog/2008/11/06/ubuntu-tu-as-mis-ou-acrobat-reader/ key gpg: gpg --no-default-keyring --keyring /etc/apt/trusted.gpg --keyserver pgp.mit.edu --recv-keys 0C5A2783

Flash: same repo apt-get install flashplugin-nonfree

w32codecs apt-get install mplayer w32codecs

java: apt-get install sun-java6-jre -plugin -fonts

microphone: now ok OOB?? modprobe snd-hda-intel model=6stack-dig http://www.linuxquestions.org/questions/linux-hardware-18/microphone-does-not-work-with-realtek-alc883-hda-555391/page3.html#post2880468

googleearth flickers: apt-get install fusion-icon Apps/System Tools/Compiz Fusion Icon -> allows to switch between compiz & metacity

TODO: nand offlineimap-courier iwl3945 glitches, getting new -1 and -2 ucodes from intellinuxwireless.org oracle? ~/old backuppc account & root/.ssh

@@ Line 58: / Line 58: @@
 * [http://support.fujitsu-siemens.com/com/support/linkapplication.html?LNG=EN&ProductID=3890 BIOS]
 ==Setup==
+The goal is to keep Vista and install Ubuntu Intrepid 8.10 as dual-boot
+===Backup===
+The laptop comes with a Vista not yet really installed, there are 3 partitions that don't fill the entire HD.
-boot on FCCU v12
-partimage backup sda1/2/4 -> external USB drive
+<br>I booted on a FCCU v12 liveCD and used partimage to backup the extended MBR (2048x512), sda1, sda2 and sda4 to an external USB drive.
+===Vista "install"===
+As the first boot of Vista will change the partitioning of the HD we've to run it now before installing Ubuntu
-boot on Vista... takes ages...
+<br>=> boot on Vista, take one, two, three coffees
-Reboot on backup utilities (F8 -> Recover) and burn 3 DVD+R
+<br>Reboot on Fudjitsu-Siemens backup utilities (F8 -> Recover) and burn 3 DVD+R disks, beware that apparently you can only burn them once.
+===Ubunbu install===
-see http://doc.ubuntu-fr.org/tutoriel/comment_amorcer_ubuntu_avec_bootmgr
+I mainly followed [http://doc.ubuntu-fr.org/tutoriel/comment_amorcer_ubuntu_avec_bootmgr this tutorial (fr)]
+<br>After Vista install, sda1 contains recovery tools as before, sda2 is about 100Gb and contains Vista, sda4 is free and about 200Gb, that's the one we will use for Ubuntu so no need to repartition anything,
-reboot on FCCU v12
+<br>Reboot on FCCU v12
-change type of sda4 -> linux
+<br>Change type of sda4 -> linux (83)
-mkfs.ext3 -I 128 /dev/sda4
-(128 because grub cannot start from 256 partition)
+<br>Format it (128 because grub cannot start from 256 partition)
+ mkfs.ext3 -I 128 /dev/sda4
-reboot on ubuntu CD
+<br>Reboot on ubuntu CD
+<br>Switch to a console to save the new mbr to e.g. a USB stick (I could have done it under FCCU):
-...
-ctrl-alt-f2 -> sudo dd mbr -> usb key
+<br>ctrl-alt-f2 -> sudo dd if=/dev/sda of=/mnt/usbkey bs=512 count=2048
-gpart -> manual -> sda4 in ext3, NO FORMAT, mount as /
+<br>In gpart, choose manual -> sda4 in ext3, NO FORMAT, mount as /
-... -> ready to install
+<br>Continue until "ready to install"
--> advanced -> install bootloader on sda4
+<br>-> advanced -> install bootloader on sda4
+===MBR setup===
-EasyBCD http://neosmart.net/dl.php?id=1 => USB stick
+Grub is on sda4 so we left the Vista MBR on sda, now we'll configure it with [http://neosmart.net/dl.php?id=1 EasyBCD]
+<br>Download EasyBCD and copy it to a USB stick
-reboot on Vista
+<br>Reboot on Vista
-easybcd -> add entry linux grub Partition2 -> add -> save (leave "grub isn't installed" disabled)
+<br>Install EasyBCD -> add entry linux grub Partition2 -> add -> save (leave "grub isn't installed" disabled)
--> change settings, boot ubuntu by default
+<br>In "change settings", choose to boot ubuntu by default
+===Ubuntu tweaking===
-googleearth flickers:
-apt-get install fusion-icon
-Apps/System Tools/Compiz Fusion Icon
--> allows to switch between compiz & metacity
 freeze at boot & often in console: hpet=disable
 http://my.opera.com/PiklesOnFire/blog/index.dml/tag/hpet=disable
@@ Line 113: / Line 108: @@
 modprobe snd-hda-intel model=6stack-dig
 http://www.linuxquestions.org/questions/linux-hardware-18/microphone-does-not-work-with-realtek-alc883-hda-555391/page3.html#post2880468
+googleearth flickers:
+apt-get install fusion-icon
+Apps/System Tools/Compiz Fusion Icon
+-> allows to switch between compiz & metacity
 TODO: