Difference between revisions of "GnuPG"

Revision as of 00:19, 5 February 2016

Those are personal notes when I decided in 2016 to generate a new key as transition from my previous one (from 2002!).
Daily subkeys are stored on a Yubikey NEO-n and master key is stored offline.

Resources

The steps I followed and which I describe only very briefly here, more to remind how I combined them, came from those excellent resources:

gpg.conf

First step was to refresh a little bit my gpg.conf.
See https://github.com/ioerror/duraconf/raw/master/configs/gnupg/gpg.conf for commented gpg.conf and https://help.riseup.net/en/security/message-security/openpgp/best-practices for the reasons behind.

no-emit-version
no-comments
keyid-format 0xlong
with-fingerprint
list-options show-uid-validity
verify-options show-uid-validity
use-agent
keyserver hkps://hkps.pool.sks-keyservers.net
keyserver-options ca-cert-file=/home/phil/.gnupg/keyservers/sks-keyservers.netCA.pem
keyserver-options no-try-dns-srv
keyserver-options no-honor-keyserver-url
keyserver-options include-revoked
personal-cipher-preferences AES256 AES192 AES CAST5
personal-digest-preferences SHA512 SHA384 SHA256 SHA224
cert-digest-algo SHA512
default-preference-list SHA512 SHA384 SHA256 SHA224 AES256 AES192 AES CAST5 ZLIB BZIP2 ZIP Uncompressed

Some more of my own:

no-greeting
keyserver-options auto-key-retrieve honor-http-proxy
list-options show-policy-urls show-notations show-keyserver-urls show-uid-validity show-unusable-uids show-unusable-subkeys show-sig-expire
verify-options show-photos show-policy-urls show-notations show-keyserver-urls show-uid-validity show-unusable-uids
utf8-strings
ask-cert-level

Offline storage

Digressing a little bit...

I chose an old SDCard to store the master key offline, but it required a little bit of maintenance because it wasn't mounting automatically:

Making sude partition table was ok:

$ sudo fdisk /dev/mmcblk0

Checking FS signatures:

$ sudo wipefs /dev/mmcblk0p1

There was still a mix of FAT and ext2 signatures, so deleting the ext2 signature based on the returned offset:

$ sudo wipefs -o 0x438 /dev/mmcblk0p1

Formatting

$ sudo mkfs.vfat /dev/mmcblk0p1
$ sudo fatlabel /dev/mmcblk0p1 GNUPG

Reinserting it to get it mounted automatically, then

$ cp ~/.gnupg/gpg.conf /media/phil/GNUPG
$ sudo mount --bind /media/phil/GNUPG ~/.gnupg

Entropy

Creating large keys require large entropy.
I like haveged for that:

$ sudo apt-get install haveged

Creating main key

Idea following https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/ is to keep the main key completely offline so if yubikey is lost, there is still some hope.

$ gpg --expert --gen-key
Please select what kind of key you want:
  (8) RSA (set your own capabilities)
Your selection? 8
Current allowed actions: Sign Certify Encrypt 
Your selection? s
Your selection? e
Current allowed actions: Certify 
Your selection? q
What keysize do you want? (2048) 4096
Requested keysize is 4096 bits
Key is valid for? (0) 2y
Is this correct? (y/N) y
Real name: Philippe Teuwen
Email address: phil@teuwen.org
Comment: 
You selected this USER-ID:
   "Philippe Teuwen <phil@teuwen.org>"
Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? o
gpg: key 0x9B554C36544C89BC marked as ultimately trusted
public and secret key created and signed.

Creating revokation certificate

$ gpg --gen-revoke 9B554C36544C89BC > /media/phil/GNUPG/rev-phil_teuwen.org_2016
sec  4096R/0x9B554C36544C89BC 2016-02-04 Philippe Teuwen <phil@teuwen.org>
Create a revocation certificate for this key? (y/N) y
Please select the reason for the revocation:
  3 = Key is no longer used
Your decision? 3
Enter an optional description; end it with an empty line:
>Using revocation certificate that was generated when key was created.
>It is very likely that I have lost access to the private key.
> 
Reason for revocation: Key is no longer used
Using revocation certificate that was generated when key was created. It is very likely that I have lost access to the private key.
Is this okay? (y/N) y

Then printing it on paper

Creating Encryption subkey

Idea following https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/ is to create the encryption key out of yubikey and importing it so it can be imported on several yubikey's.

$ gpg --edit-key 9B554C36544C89BC
gpg> addkey
Please select what kind of key you want:
  (6) RSA (encrypt only)
Your selection? 6
What keysize do you want? (2048) 2048
Please specify how long the key should be valid.
Key is valid for? (0) 2y
Is this correct? (y/N) y
Really create? (y/N) y
pub  4096R/0x9B554C36544C89BC  created: 2016-02-04  expires: 2018-02-03  usage: C   
                               trust: ultimate      validity: ultimate
sub  2048R/0x47B68B62B62C8F88  created: 2016-02-04  expires: 2018-02-03  usage: E   
[ultimate] (1). Philippe Teuwen <phil@teuwen.org>
gpg> save

Just to be sure

$ gpg --export-secret-key 9B554C36544C89BC > /media/phil/GNUPG/9B554C36544C89BC-2016-02-04-47B68B62B62C8F88-secret.pgp
$ gpg --delete-secret-key 9B554C36544C89BC
$ gpg --import < /media/phil/GNUPG/9B554C36544C89BC-2016-02-04-47B68B62B62C8F88-secret.pgp

Yubikey

$ sudo apt-get install yubikey-personalization ykneomgr
$ wget https://raw.githubusercontent.com/Yubico/yubikey-personalization/master/69-yubikey.rules 
$ wget https://raw.githubusercontent.com/Yubico/yubikey-personalization/master/70-yubikey.rules 
$ sudo mv *rules /etc/udev/rules.d/
$ sudo chown root.root /etc/udev/rules.d/*yubikey.rules

Insert yubikey NEO-n

$ ykinfo -a

To keep possibility to use all modes simultaneously:

$ ykpersonalize -m86
Firmware version 3.3.0 Touch level 1285 Program sequence 1
The USB mode will be set to: 0x86
Commit? (y/n) [n]: y

Creating Signature and Authentication subkeys

Yes default admin PIN is 12345678 and default user PIN is 123456.
We'll change them later.

$ gpg --edit-key 9B554C36544C89BC
gpg> addcardkey
Please select the type of key to generate:
   (1) Signature key
Your selection? 1
Enter Admin PIN: 12345678
Enter PIN: 123456
Please specify how long the key should be valid.
Key is valid for? (0) 2y
Is this correct? (y/N) y
Really create? (y/N) y
pub  4096R/0x9B554C36544C89BC  created: 2016-02-04  expires: 2018-02-03  usage: C   
                               trust: ultimate      validity: ultimate
sub  2048R/0x47B68B62B62C8F88  created: 2016-02-04  expires: 2018-02-03  usage: E   
sub  2048R/0xAEBAADBEE208E2DD  created: 2016-02-04  expires: 2018-02-03  usage: S   
[ultimate] (1). Philippe Teuwen <phil@teuwen.org>

gpg> addcardkey
Please select the type of key to generate:
   (3) Authentication key
Your selection? 3
Please specify how long the key should be valid.
Key is valid for? (0) 2y
Is this correct? (y/N) y
Really create? (y/N) y
pub  4096R/0x9B554C36544C89BC  created: 2016-02-04  expires: 2018-02-03  usage: C   
                               trust: ultimate      validity: ultimate
sub  2048R/0x47B68B62B62C8F88  created: 2016-02-04  expires: 2018-02-03  usage: E   
sub  2048R/0xAEBAADBEE208E2DD  created: 2016-02-04  expires: 2018-02-03  usage: S   
sub  2048R/0xE5151B7FDCA95A14  created: 2016-02-04  expires: 2018-02-03  usage: A   
[ultimate] (1). Philippe Teuwen <phil@teuwen.org>

Ready to import Encryption subkey?

At this point we should import the encryption key to the yubikey but I got some error:

gpg: error writing key to card: not supported

Some say to use keyParser.py but I found out gpg2 works. Gpg could work directly with the card (except for the keytocard obviously) but Gpg2 needs sdaemon for that:

$ sudo apt-get install gnupg2 scdaemon

Yet another quirk: gnupg gave some warnings about locking from FAT but gnupg2 just refuses using FAT, so I add to the gpg.conf of the SD-Card:

# allow linux to write to FAT disks
lock-never

Encryption key to Yubikey

$ gpg2 --edit-key 9B554C36544C89BC
gpg> toggle
gpg> key 1
sec  4096R/0x9B554C36544C89BC  created: 2016-02-04  expires: 2018-02-03
ssb* 2048R/0x47B68B62B62C8F88  created: 2016-02-04  expires: never     
ssb  2048R/0xAEBAADBEE208E2DD  created: 2016-02-04  expires: never     
                     card-no: 0006 03037217
ssb  2048R/0xE5151B7FDCA95A14  created: 2016-02-04  expires: never     
                     card-no: 0006 03037217
(1)  Philippe Teuwen <phil@teuwen.org>
gpg> keytocard
Please select where to store the key:
   (2) Encryption key
Your selection? 2
gpg> save

Adding UID and photo

Choose a 240x288 picture strongly compressed (I chose jpeg quality 20) to obtain a size < 5kb.

$ gpg2 --edit-key 9B554C36544C89BC
gpg> adduid
Real name: Philippe Teuwen
Email address: pteuwen@quarkslab.com
Comment: 
You selected this USER-ID:
    "Philippe Teuwen <pteuwen@quarkslab.com>"
Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? o

gpg> addphoto
Enter JPEG filename for photo ID: ~/phil20.jpg
pub  4096R/0x9B554C36544C89BC  created: 2016-02-04  expires: 2018-02-03  usage: C   
                               trust: ultimate      validity: ultimate
sub  2048R/0x47B68B62B62C8F88  created: 2016-02-04  expires: 2018-02-03  usage: E   
sub  2048R/0xAEBAADBEE208E2DD  created: 2016-02-04  expires: 2018-02-03  usage: S   
sub  2048R/0xE5151B7FDCA95A14  created: 2016-02-04  expires: 2018-02-03  usage: A   
[ultimate] (1)  Philippe Teuwen <phil@teuwen.org>
[ unknown] (2). Philippe Teuwen <pteuwen@quarkslab.com>
[ unknown] (3)  [jpeg image of size 4266]

gpg> uid 1
gpg> primary
gpg> save

Almost there

Exporting key

$ gpg --armor --export 9B554C36544C89BC > /media/phil/GNUPG/9B554C36544C89BC.asc

And pushing it to http://www.yobi.be/files/9B554C36544C89BC.asc

Back to the daily .gnupg

$ sudo umount ~/.gnupg

Changing default PINs

$ gpg --card-edit
gpg/card> admin
Admin commands are allowed
gpg/card> passwd
gpg: OpenPGP card no. D2760001240102000006030372170000 detected
1 - change PIN
Your selection? 1
Please enter the PIN
   123456
New PIN
   ...              
New PIN
   ...
PIN changed.     

3 - change Admin PIN
Your selection? 3
gpg: 3 Admin PIN attempts remaining before card is permanently locked
Please enter the Admin PIN
   12345678                
New Admin PIN
   ...                    
New Admin PIN
   ...
PIN changed.     

Q - quit
Your selection? q

gpg/card> forcesig
gpg/card> url
URL to retrieve public key: http://www.yobi.be/files/9B554C36544C89BC.asc

gpg/card> fetch
gpg: requesting key 0xAEBAADBEE208E2DD from http server www.yobi.be

gpg/card> quit

$ gpg --card-status
Application ID ...: D2760001240102000006030372170000
Version ..........: 2.0
Manufacturer .....: unknown
Serial number ....: xxxxxxxxx
Name of cardholder: [not set]
Language prefs ...: [not set]
Sex ..............: unspecified
URL of public key : http://www.yobi.be/files/9B554C36544C89BC.asc
Login data .......: [not set]
Signature PIN ....: not forced
Key attributes ...: 2048R 2048R 2048R
Max. PIN lengths .: 127 127 127
PIN retry counter : 3 3 3
Signature counter : 2
Signature key ....: 67E1 AAA2 46D7 9037 7671  BAD5 AEBA ADBE E208 E2DD
      created ....: 2016-02-04 10:56:03
Encryption key....: 55A5 1FF1 F45A A846 EC12  A5D4 47B6 8B62 B62C 8F88
      created ....: 2016-02-04 10:26:52
Authentication key: 93FE E3BA 0F4D 4461 19E8  1CBE E515 1B7F DCA9 5A14
      created ....: 2016-02-04 10:57:35
General key info..: 
pub  2048R/0xAEBAADBEE208E2DD 2016-02-04 Philippe Teuwen <phil@teuwen.org>
sec#  4096R/0x9B554C36544C89BC  created: 2016-02-04  expires: 2018-02-03
ssb>  2048R/0x47B68B62B62C8F88  created: 2016-02-04  expires: 2018-02-03
                      card-no: 0006 03037217
ssb>  2048R/0xAEBAADBEE208E2DD  created: 2016-02-04  expires: 2018-02-03
                      card-no: 0006 03037217
ssb>  2048R/0xE5151B7FDCA95A14  created: 2016-02-04  expires: 2018-02-03
                      card-no: 0006 03037217

Changing default key in gpg.conf

default-key  0xF14883379E8DD09F03280E1B9B554C36544C89BC

Last check

$ sudo apt-get install hopenpgp-tools
$ hkt export-pubkeys 'AEBAADBEE208E2DD' | hokey lint

All green \o/

Signing new key with the old one

$ gpg --default-key 9ad7e3db --sign-key 9B554C36544C89BC
Really sign all user IDs? (y/N) y
   (3) I have done very careful checking.
Your selection? (enter `?' for more information): 3
Really sign? (y/N) y

$ gpg --send-key 9B554C36544C89BC

As it's a pool I sent it 10x, rather than waiting them to all sync...

And also for those still using pgp.mit.edu:

$ gpg --keyserver pgp.mit.edu --send-key 9B554C36544C89BC

Transition

Now let's ask some helpful souls who signed my old key.

Stealing and adapting key transition text from https://we.riseup.net/assets/176898/key%20transition

Mass mailing to those who've signed the old one:

$ gpg --list-sigs 9ad7e3db|grep ^sig|sed 's/.*<//;s/>.*//;/^sig/d'|sort|uniq|tr '\n' ','

Date: 2016-02-04

For a number of reasons[0], I've recently set up a new OpenPGP key,
and will be transitioning away from my old one.

The old key will continue to be valid for some time, but I prefer all
future correspondence to come to the new one. I would also like this
new key to be re-integrated into the web of trust. This message is
signed by both keys to certify the transition.

The old key was:

pub 1024D/0x7A135F579AD7E3DB 2002-05-05 [expires: 2017-08-13]
sub 2048g/0x78FC60279A4A59B9 2002-05-05 [expires: 2017-08-13]
sub 4096R/0xF2FD1762608F63B7 2007-08-16 [expires: 2017-08-13]
fingerprint = 440A 3A9E 56E9 D90E 99D7 63A8 7A13 5F57 9AD7 E3DB

And the new key is:
pub 4096R/0x9B554C36544C89BC 2016-02-04 [expires: 2018-02-03]
sub 2048R/0x47B68B62B62C8F88 2016-02-04 [expires: 2018-02-03]
sub 2048R/0xAEBAADBEE208E2DD 2016-02-04 [expires: 2018-02-03]
sub 2048R/0xE5151B7FDCA95A14 2016-02-04 [expires: 2018-02-03]
fingerprint = F148 8337 9E8D D09F 0328 0E1B 9B55 4C36 544C 89BC

To fetch the full key from a public key server, you can simply do:

gpg --keyserver pool.sks-keyservers.net --recv-key F14883379E8DD09F03280E1B9B554C36544C89BC

If you already know my old key, you can now verify that the new key is
signed by the old one:

gpg --check-sigs F14883379E8DD09F03280E1B9B554C36544C89BC

If you don't already know my old key, or you just want to be double
extra paranoid, you can check the fingerprint against the one above:

gpg --fingerprint F14883379E8DD09F03280E1B9B554C36544C89BC

If you are satisfied that you've got the right key, and the UIDs match
what you expect, I'd appreciate it if you would sign my key. You can
do that by issuing the following command:

**
NOTE: if you have previously signed my key but did a local-only
signature (lsign), you will not want to issue the following, instead
you will want to use --lsign-key, and not send the signatures to the
keyserver
**

gpg --sign-key F14883379E8DD09F03280E1B9B554C36544C89BC

I'd like to receive your signatures on my key. You can either send me
an e-mail with the new signatures (if you have a functional MTA on
your system):

gpg --export F14883379E8DD09F03280E1B9B554C36544C89BC | \
gpg --encrypt -r F14883379E8DD09F03280E1B9B554C36544C89BC --armor | \
mail -s 'OpenPGP Signatures' phil@teuwen.org

Additionally, I highly recommend that you implement a mechanism to
keep your key material up-to-date so that you obtain the latest
revocations, and other updates in a timely manner. You can do regular
key updates by using parcimonie[1] to refresh your keyring. Parcimonie
is a daemon that slowly refreshes your keyring from a keyserver over
Tor. It uses a randomized sleep, and fresh tor circuits for each key.
The purpose is to make it hard for an attacker to correlate the key
updates with your keyring.

I also highly recommend checking out the excellent Riseup GPG best
practices doc, from which I stole most of the text for this transition
message ;-)

https://we.riseup.net/debian/openpgp-best-practices

Please let me know if you have any questions, or problems, and sorry
for the inconvenience.

If you're curious, I've briefly documented all the steps using a Yubikey on my wiki [2].

Philippe Teuwen

0. https://www.debian-administration.org/users/dkg/weblog/48
1. https://gaffer.ptitcanardnoir.org/intrigeri/code/parcimonie/
2. http://wiki.yobi.be/wiki/GnuPG

In an email signed with my old key...

OpenSSH

Using the OpenPGP key and the Yubikey for OpenSSH

$ sudo apt-get install monkeysphere

We need to specifying the authentication subkey here!

$ gpgkey2ssh E5151B7FDCA95A14
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCeNXjx+2M1F7CuYRMkoHv6iUnXe93JatAjhmh1ciXIrTk/Agc4JEgb9uTxYA3pNe/qXVSrSdAqJu0cUENj30rLvKOliL0MH1TxGDnZ0JSxv0UA/skwapRwiTKgsHHng7gbq1/07eBl0luywLT1E/4sbeZ6cAK9e8JAO9GahiyYnrzt2nXzoVxGYl2AHkHFuCqHEMH/KQuQ8Tba+ZjqpRbjnreuI9tJQ8eWpMjLr2AYuWgAU5GtbWFHJi0WJI/2kYybT7co7Kldoxg8PRvBE/QQPdP811jc06pf4CVgfCGvCWZaslqG5pLy8LneqYciuQuXDCQMlAWniThTPjf5VLhx COMMENT

Paper backup of the secret keys

If you don't trust SD-Card longevity...

apt-get install paperkey
gpg --export-secret-key key_id | paperkey