Hantek DSO-1060: Difference between revisions
| Line 28: | Line 28: | ||
* http://sourceforge.net/projects/oscope2100/ |
* http://sourceforge.net/projects/oscope2100/ |
||
===OpenHantek=== |
===OpenHantek=== |
||
Get it [http://sourceforge.net/projects/openhantek/files/ |
Get it [http://sourceforge.net/projects/openhantek/files/ here] as well as dsoextractfw |
||
$tar xjf openhantek-0.1.0.tar.bz2 |
$ tar xjf openhantek-0.1.0.tar.bz2 |
||
$ cd OpenHantek |
$ cd OpenHantek |
||
# aptitude install libqt4-dev libfftw3-dev |
# aptitude install libqt4-dev libfftw3-dev |
||
| Line 35: | Line 35: | ||
$ make |
$ make |
||
# make install |
# make install |
||
$ tar xjf dsoextractfw-0.6.0.tar.bz2 |
|||
$ cd dsoextractfw |
|||
# aptitude install libbfd-dev #(this actually installs binutils-dev) |
|||
$ ./configure |
|||
$ make |
|||
Get the DSO1060.sys from the windows drivers CD |
|||
Mmm visibly it doesn't know how to extract firmware from the 1060 model :-( |
|||
I also tried from SVN: |
|||
git svn clone https://openhantek.svn.sourceforge.net/svnroot/openhantek/trunk |
|||
sudo aptitude install libusb-1.0-0-dev |
|||
But that one segfaults most of the time & dsoextractfw code is not present |
|||
kernel: [784901.198320] openhantek[12245]: segfault at 21 ip 0000000000431de7 sp 00007fff14741ba0 error 4 in openhantek[400000+64000] |
|||
When connecting the scopemeter via USB it gives: idVendor=4348, idProduct=5537, Product: DSO10, Manufacturer: Hantek |
|||
Revision as of 11:06, 14 August 2010
Description
Chinese handheld scopemeter, 2 inputs 60MHz & DMM 6000 pts
Bought on this French e-shop
Internal data:
- Module DSO1060
- Serial No. DSO0000855
- Firmware Version: 1.68
- Hardware version: 5.2.34.0.0
USB memory stick
The device is USB-host capable but I had many troubles to get him accessing properly a memory stick.
On a 6Gb harddrive it hung when I tried to write a file, and on a 256Mb flash it was always claiming "Unknown Filesystem".
I finally managed to get it working by reformatting the 256Mb flash as FAT32 (FAT16 failed, or was it FAT12?)
Firmware upgrade
Once you have a working USB stick you can try upgrading the firmware.
I found the firmware version 1.70 here, follow simply the included pdf (the Chinese version is here).
If there is a newer version it should come via the same link I guess...
Issues
A known issue is in continuity test mode, it's rather slow to beep, which makes it much less usable than a cheap continuity tester...
Upgrade to v1.70 didn't improve the situation
Under Linux
Opensource projects of interest:
- http://sourceforge.net/projects/hantekdso/
- http://sourceforge.net/projects/openhantek/
- http://sourceforge.net/projects/oscope2100/
OpenHantek
Get it here as well as dsoextractfw
$ tar xjf openhantek-0.1.0.tar.bz2 $ cd OpenHantek # aptitude install libqt4-dev libfftw3-dev $ qmake $ make # make install
$ tar xjf dsoextractfw-0.6.0.tar.bz2 $ cd dsoextractfw # aptitude install libbfd-dev #(this actually installs binutils-dev) $ ./configure $ make
Get the DSO1060.sys from the windows drivers CD
Mmm visibly it doesn't know how to extract firmware from the 1060 model :-(
I also tried from SVN:
git svn clone https://openhantek.svn.sourceforge.net/svnroot/openhantek/trunk sudo aptitude install libusb-1.0-0-dev
But that one segfaults most of the time & dsoextractfw code is not present
kernel: [784901.198320] openhantek[12245]: segfault at 21 ip 0000000000431de7 sp 00007fff14741ba0 error 4 in openhantek[400000+64000]
When connecting the scopemeter via USB it gives: idVendor=4348, idProduct=5537, Product: DSO10, Manufacturer: Hantek