Difference between revisions of "USB armory"
Jump to navigation
Jump to search
m (→Links) |
m |
||
| Line 14: | Line 14: | ||
* [https://github.com/inversepath/usbarmory HW/SW source] |
* [https://github.com/inversepath/usbarmory HW/SW source] |
||
* [https://github.com/inversepath/u-boot-usbarmory U-Boot] |
* [https://github.com/inversepath/u-boot-usbarmory U-Boot] |
||
| + | =Quick setup= |
||
| + | Set manual ip to usb0: 10.0.0.2, no routing, no DNS, via NotworkManager or: |
||
| + | /sbin/ip link set usb0 up |
||
| + | /sbin/ip addr add 10.0.0.2/24 dev usb0 |
||
| + | |||
| + | Give connectivity to USB armory |
||
| + | /sbin/iptables -t nat -A POSTROUTING -s 10.0.0.1/32 -o wlan0 -j MASQUERADE |
||
| + | echo 1 > /proc/sys/net/ipv4/ip_forward |
||
| + | |||
| + | Connect |
||
| + | ssh usbarmory@10.0.0.1 # pwd usbarmory |
||
Revision as of 21:49, 5 March 2015
my personal notes about USB armory
Hardware
- Freescale i.MX53 ARM® Cortex™-A8 800MHz
- 512MB DDR3 RAM
Links
Quick setup
Set manual ip to usb0: 10.0.0.2, no routing, no DNS, via NotworkManager or:
/sbin/ip link set usb0 up /sbin/ip addr add 10.0.0.2/24 dev usb0
Give connectivity to USB armory
/sbin/iptables -t nat -A POSTROUTING -s 10.0.0.1/32 -o wlan0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward
Connect
ssh usbarmory@10.0.0.1 # pwd usbarmory