Difference between revisions of "IDream ID-SMID01 SmartCard reader"

Revision as of 13:31, 5 February 2008

10€ at Carrefour

Official page
You can get a driver from iDream for pcsc-lite: linux driver_STD200_THRC.zip but I could not get it working and it's for a quite old version (pcsclite 0.9.1).
Identification of the device:

lsusb
Bus 003 Device 004: ID 062d:0001 Taiwan Tai-Hao Enterprises Co., Ltd

I tried to install openct and opensc, there was communication with the reader with the standard CCID, I can get communication with a VISA card but with the Belgian eID I get error at protocol selection and the beidgui was not working neither.

apt-get install beidgui
=> libopenct1 libpcsclite1 libbeidlibopensc2 libbeid2 beid-tools beidgui libccid pcscd

# openct-tool atr                                                                      
Detected CCID Compatible                                                             
Card present, status changed                                                         
ATR: 3b 98 13 40 0a a5 03 01 01 01 ad 13 11                                          
Jan  8 01:09:28 mercure ifdhandler[1045]: CCID Compatible: Bad PTS response          
Jan  8 01:09:28 mercure ifdhandler[1045]: Protocol selection failed

VISA card replies correct ATR & protocol selection:

# cardos-info                                                                        
3b:67:00:00:00:00:00:00:00:90:00                                                     
Received (SW1=0x6D, SW2=0x00)

I could finally get it working, not with openct which gave the broken results as shown above but with libccid:
Edit /etc/libccid_Info.plist and add the vendor/product ID to the list, e.g.:

--- libccid_Info.plist.old      2008-02-04 23:54:26.000000000 +0100
+++ libccid_Info.plist  2008-02-04 23:55:23.000000000 +0100
@@ -180,6 +180,7 @@
               <string>0x09C3</string>
               <string>0x0783</string>
               <string>0x0C4B</string>
+               <string>0x062D</string>
       </array>

       <key>ifdProductID</key>
@@ -268,6 +269,7 @@
               <string>0x0008</string>
               <string>0x0003</string>
               <string>0x0300</string>
+               <string>0x0001</string>
       </array>

       <key>ifdFriendlyName</key>
@@ -356,6 +358,7 @@
               <string>ActivCard USB Reader 2.0</string>
               <string>C3PO LTC31</string>
               <string>Reiner-SCT cyberJack pinpad(a)</string>
+               <string>iDream ID-SMID01</string>
       </array>

       <key>Copyright</key>

Now a simple call to beidgui works :-)

@@ Line 2: / Line 2: @@
 * [http://www.idream.be/consulter.php?pid=50&tab=0 Official page]
-* You can get the driver for pcsc-lite: [http://www.idream.be/getfile.php?id=107 linux driver_STD200_THRC.zip]
+* You can get a driver from iDream for pcsc-lite: [http://www.idream.be/getfile.php?id=107 linux driver_STD200_THRC.zip] but I could not get it working and it's for a quite old version (pcsclite 0.9.1).
+* Identification of the device:
-I tried both to get the binary running with my pcsclite 1.4.4 and the old pcsclite 0.9.1 given in the zip, without any success
+ lsusb
+ Bus 003 Device 004: ID 062d:0001 Taiwan Tai-Hao Enterprises Co., Ltd
-I tried to install openct and opensc, there is communication with the reader with the standard CCID, I can get communication with a VISA card but with the Belgian eID I get error at protocol selection
+I tried to install openct and opensc, there was communication with the reader with the standard CCID, I can get communication with a VISA card but with the Belgian eID I get error at protocol selection and the beidgui was not working neither.
+ apt-get install beidgui
+ => libopenct1 libpcsclite1 libbeidlibopensc2 libbeid2 beid-tools beidgui libccid pcscd
  # openct-tool atr
@@ Line 19: / Line 22: @@
  Received (SW1=0x6D, SW2=0x00)
+I could finally get it working, not with openct which gave the broken results as shown above but with libccid:
+<br>Edit /etc/libccid_Info.plist and add the vendor/product ID to the list, e.g.:
-Installing beidgui and dependencies:
-<br>libopenct1 libpcsclite1 libbeidlibopensc2 libbeid2 beid-tools beidgui libccid pcscd
-less /usr/share/doc/libbeidlibopensc2/README.Debian
-===Update===
-Yeah I could finally get it working, not with openct which gave broken results but with libccid:
- apt-get install libccid
-Then edit /etc/libccid_Info.plist and add the vendor/product ID to the list, e.g.:
  --- libccid_Info.plist.old      2008-02-04 23:54:26.000000000 +0100
  +++ libccid_Info.plist  2008-02-04 23:55:23.000000000 +0100
@@ Line 55: / Line 51: @@
         <key>Copyright</key>
 Now a simple call to beidgui works :-)
-===Firefox security module===
-To add the security module to Firefox:
- apt-get install libbeid2-dev libbeidlibopensc2-dev
-Visit file:///usr/share/beid/beid-pkcs11-register.html
-===Exploring===
- pkcs15-tool --dump
- pkcs15-tool --read-certificate 02 > my_auth.crt
- pkcs15-tool --read-certificate 03 > my_sign.crt
- pkcs15-tool --read-certificate 04 > belgium.crt
- pkcs15-tool --read-certificate 06 >> belgium.crt
- openssl x509 -in my_auth.crt -text
- pkcs15-tool --read-ssh-key 2
-===SSH===
-Inspired from http://simi.be/?page_id=9
-Getting the patch from http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355274 and porting it to v4.7p1
-<br>I recompile ssh with smartcard support.
- apt-get source openssh-client
- cd openssh-4.7p1
- patch -p1 < ../mypatch
- dpkg-buildpackage -uc -us -rfakeroot
-Sending my public key to the ssh server:
- pkcs15-tool --read-ssh-key 2 |tail -n1|ssh user@host 'cat - >> ~/.ssh/authorized_keys'
-Then logging, being prompted for my PIN:
- ssh -I 0 user@host.com
-===TODO===
-http://blog.eikke.com/index.php/ikke/2007/10/29/using_your_belgian_eid_for_ssl_authentic
-http://christophe.vandeplas.com/2008/02/03/openvpn-belgian-eid

Difference between revisions of "IDream ID-SMID01 SmartCard reader"

Revision as of 13:31, 5 February 2008

Navigation menu

Search