Revision as of 13:49, 5 October 2016

Some resources...

JTAG

Tjtag-arduino Use the arduino as a JTAG adaptor with Tjtag
Arduiggler Arduino based JTAG cable with UrJTAG
JTAGduino The JTAGduino project has the goal of using Arduino as a JTAG interface
FUJI Free USB JTAG interface
JTAGenum (Arduino-based) scans pins for basic JTAG functionality and can be used to enumerate the IR for undocumented opcodes
JTAGulator open source hardware tool that assists in identifying OCD connections from test points, vias, or component pads on a target device
jtag-finder mirror
Black Magic Probe in-application debugging tool using a JTAG or Serial Wire Debugging (SWD) port. Targets ARM Cortex-M and Cortex-A based microcontrollers.
- HydraBus JTAG/SWD native debugger supported officially in blackmagic github

@@ Line 17: / Line 17: @@
 =EEPROM extraction=
 * Demystifying Hardware Security [https://www.optiv.com/blog/demystifying-hardware-security-part-i Part I], [https://www.optiv.com/blog/demystifying-hardware-security-part-ii Part II], [https://www.optiv.com/blog/demystifying-hardware-security-part-iii Part III]
+* Practical Reverse Engineering (Huawei HG533 router)
+** [http://jcjc-dev.com/2016/04/08/reversing-huawei-router-1-find-uart/ Part I Hunting for Debug Ports]
+** [http://jcjc-dev.com/2016/04/29/reversing-huawei-router-2-scouting-firmware/ Part II Scouting the Firmware]
+** [http://jcjc-dev.com/2016/05/23/reversing-huawei-3-sniffing/ Part III Following the Data]
+** [http://jcjc-dev.com/2016/06/08/reversing-huawei-4-dumping-flash/ Part IV Dumping the Flash]
 =Firmware extraction, glitch way=
 * [https://www.youtube.com/watch?v=TeCQatNcF20 scanlime:015 / Glitchy Descriptor Firmware Grab] (video) using chipwhisperer
+=After firmware extraction=
+* Reversing and Exploiting Embedded Devices: The Software Stack [https://www.praetorian.com/blog/reversing-and-exploiting-embedded-devices-part-1-the-software-stack Part I]
 =SCA/FI=
 * [https://newae.com/tools/chipwhisperer/ ChipWhisperer]